Xircom Pcmcia Ethernet+Modem Card

Xircom Pcmcia Ethernet+Modem Card

Post by xyz » Wed, 29 Jul 1998 04:00:00



When I try to install that card on my Acer notebook using following
commands:
# Pcmcia.generic start
# PcmciaLaunch -v '0x601,Net.ether1000 -p$IOPORT -i$IRQ'
there comes a writing: "Locking ioport=2f8-2ff ioport2=0-ffffffff irq=5 in
socket 0"
and warning "Net.ether1000: INITIALIZATION ERROR 01"

Ask for help
--
Piotr Uruski

 
 
 

Xircom Pcmcia Ethernet+Modem Card

Post by Henrik W. Mai » Wed, 29 Jul 1998 04:00:00


Hi  Piotr!

The Xircom does not work under QNX. See the pcmcia_support.txt file
from QNX tech support which says about the Xircom card:

[snip]
Xircom PCMCIA Credit Card Ethernet Adapter 2PS: Does not work with any
                                                any of our drivers
[snip]

So it looks like there is no chance to get the Xircom card working.
Try the Socket EA+. It has a good track record with QNX.

Henrik


Quote:>When I try to install that card on my Acer notebook using following
>commands:
># Pcmcia.generic start
># PcmciaLaunch -v '0x601,Net.ether1000 -p$IOPORT -i$IRQ'
>there comes a writing: "Locking ioport=2f8-2ff ioport2=0-ffffffff irq=5 in
>socket 0"
>and warning "Net.ether1000: INITIALIZATION ERROR 01"

>Ask for help
>--
>Piotr Uruski

___________________________________

Dipl.-Ing. Henrik W. Maier
Powercorp Pty Ltd
3406 Export Drive
Trade Development Zone
Northern Territory 0822 Australia
Tel: +61 (0)8 8947 0933
Fax: +61 (0)8 8947 0925

___________________________________