Very Computer

by **Sunil Ga** » Fri, 30 Sep 1994 19:21:54

I have some CP/M disks with some program source on it and I need to read
this info into either a DOS or MAC machine. Can anyone suggest who might
be able to provide this service ? Any help would be appreciated and I'm sorry
if this question has already been asked before but I am not a regular on this
group and I am doing this for a friend.

Regards,

-------------------------------------------------------------------------------
Sunil Gaur (McDonnell Information Services) PRO-IV.
Tele : +44 (0)442 272093 (Direct line), Fax. +44 (0)442 234443

-------------------------------------------------------------------------------

by **Michael Sulliv** » Sat, 01 Oct 1994 06:40:28

Quote:
> I have some CP/M disks with some program source on it and I need to read
> this info into either a DOS or MAC machine. Can anyone suggest who might
> be able to provide this service ? Any help would be appreciated and I'm sorry
> if this question has already been asked before but I am not a regular on this
> group and I am doing this for a friend.

Easiest way is to get the original cp/m machine up with MEX or other comms
program running xmodem protocol and transfer via a serial line to a mac
running a comms program with the same (xmodem) protocol. Failing that, the
22disk (a pc shareware utility) will run on a pc and likely read your disk
format directly on the pc. Then transfer the cp/m file from the pc to the
mac via a serial line and comms programs, some network both systems share,
or, assuming you can put the cp/m files on a 3.5" HDD dos floppy, via mac's
Apple File exchange (or other utilty to read dos disks.
Hope this helps...
Mike

Very Computer

Need conversion from CP/M -> DOS/MAC

Need conversion from CP/M -> DOS/MAC

Need conversion from CP/M -> DOS/MAC