MS Side Winder 3D PRO is not not recognized by operating system

MS Side Winder 3D PRO is not not recognized by operating system

Post by Mikhail Zhurik » Sat, 06 May 2000 04:00:00



Hello, Flight-Sim Funs !

After installation of a new motherboard (MS-6309 / Apollo Pro 133A) and
sound card (Aureal Vortex 2) and re-installation of operating system
(Windows 98 SE, DirectX 7.0) my joystick (MS Side Winder 3D Pro) is not
recognized by system and it repots that the device is "not connected". But
if I run any game under DOS, the joystick works fine.

Thanks in advance for any ideas enabling to solve this problem and to
continue my virtual flights.

Best Regards,
Mikhail Zhurikh.

 
 
 

MS Side Winder 3D PRO is not not recognized by operating system

Post by Joseph Canonic » Sat, 06 May 2000 04:00:00


Did you re-install your sidewinder software?  BTW...the joystick works in
analog mode in dos....Digital mode in Windows

> Hello, Flight-Sim Funs !

> After installation of a new motherboard (MS-6309 / Apollo Pro 133A) and
> sound card (Aureal Vortex 2) and re-installation of operating system
> (Windows 98 SE, DirectX 7.0) my joystick (MS Side Winder 3D Pro) is not
> recognized by system and it repots that the device is "not connected". But
> if I run any game under DOS, the joystick works fine.

> Thanks in advance for any ideas enabling to solve this problem and to
> continue my virtual flights.

> Best Regards,
> Mikhail Zhurikh.


 
 
 

MS Side Winder 3D PRO is not not recognized by operating system

Post by Ed Medli » Sun, 07 May 2000 04:00:00


You also probably have the older version of the Sidewinder software on the
disk that came with the stick. Make sure you go to the MS Sidewinder site
and download the new (newest anyway) software. 3.02 I beleive is the
version. www.microsoft.com/hardware/ is the url.

--

Regards,
Ed Medlin

http://fly.to/Nor-East
www.simflight.com


> Did you re-install your sidewinder software?  BTW...the joystick works in
> analog mode in dos....Digital mode in Windows


> > Hello, Flight-Sim Funs !

> > After installation of a new motherboard (MS-6309 / Apollo Pro 133A) and
> > sound card (Aureal Vortex 2) and re-installation of operating system
> > (Windows 98 SE, DirectX 7.0) my joystick (MS Side Winder 3D Pro) is not
> > recognized by system and it repots that the device is "not connected".
But
> > if I run any game under DOS, the joystick works fine.

> > Thanks in advance for any ideas enabling to solve this problem and to
> > continue my virtual flights.

> > Best Regards,
> > Mikhail Zhurikh.

 
 
 

MS Side Winder 3D PRO is not not recognized by operating system

Post by Lynton Nicholl » Wed, 10 May 2000 04:00:00


I had the same problem and I found the answer on the Microsoft knowledge
base. It happens with some new hardware combinations. You need the latest
drivers and there is also a patch to install. It fixed the problem. BTW you
also need DirectX 7a.
Best of luck,
Lyn.


Quote:> Hello, Flight-Sim Funs !

> After installation of a new motherboard (MS-6309 / Apollo Pro 133A) and
> sound card (Aureal Vortex 2) and re-installation of operating system
> (Windows 98 SE, DirectX 7.0) my joystick (MS Side Winder 3D Pro) is not
> recognized by system and it repots that the device is "not connected". But
> if I run any game under DOS, the joystick works fine.

> Thanks in advance for any ideas enabling to solve this problem and to
> continue my virtual flights.

> Best Regards,
> Mikhail Zhurikh.

 
 
 

MS Side Winder 3D PRO is not not recognized by operating system

Post by senator6 » Wed, 10 May 2000 04:00:00


I had this problem a year or so ago and there is a solution.
Unfortunately I am at the office and my notes are at home so if

when I get home and send to you. Its a setting called DMA
(Direct Memeory Access) but I don't recall how to find it.

* Sent from RemarQ http://www.remarq.com The Internet's Discussion Network *
The fastest and easiest way to search and participate in Usenet - Free!

 
 
 

1. Microsoft Side Winder 3D Pro

I`ve downloaded the latest driver MS version 3.02 plus the Pro patch and no
luck in getting the joystick to work.  It will work fine for a while then
the controls (FS2000) will be lost.  Using DirectX version 7.0.  I'm helping
a friend.  If anyone has a solution, would be greatly appreciated.

Thank you,
Anne-Marie   "Remove the NO.SPAM from my e-mail address to contact me."

2. Keyboard Macro ???

3. Side Winder 3D Pro

4. Graphics Tablet ROM

5. !it's a good idea buy a Side Winder 3d Pro for play simulator?????????

6. Printing Labels

7. Hot requirement for Tibco Developer/Analyst

8. Side Winder Pro 3D

9. FS98 & MS Side Winder Pro!

10. Sidewinder 3D Pro not recognized in FS 98

11. Sideslip with MS Sidewinder pro 3d not working