VxWorks and IPSEC

VxWorks and IPSEC

Post by steven » Fri, 04 Aug 2000 04:00:00



Hi VxWorkers,

we need an IPSEC-Implementation for VxWorks (Tornado2).
Does somebody know where we can get a solution ?

Regards,
Torsten

--

**************************************************************************
fraunhofer institute of microelectronic circuits and systems
department sat

address    finkenstrasse 61          phone      +0049/203/3783-238
           47057 duisburg            fax        +0049/203/3783-266
           germany
internet   http://www.ims.fhg.de and http://www.inhaus-nrw.de
**************************************************************************

 
 
 

VxWorks and IPSEC

Post by F. van Eijkelenbur » Sat, 05 Aug 2000 04:00:00


http://www.windriver.com/cgi-bin/corporate/tradeWinds/viewProd.cgi?id...

if this is not what you're looking for, just go to the windriversite
(http://www.wrs.com/) and search for ipsec

Frank


> Hi VxWorkers,

> we need an IPSEC-Implementation for VxWorks (Tornado2).
> Does somebody know where we can get a solution ?

> Regards,
> Torsten

> --

> **************************************************************************
> fraunhofer institute of microelectronic circuits and systems
> department sat

> address    finkenstrasse 61          phone      +0049/203/3783-238
>            47057 duisburg            fax        +0049/203/3783-266
>            germany
> internet   http://www.ims.fhg.de and http://www.inhaus-nrw.de
> **************************************************************************


 
 
 

VxWorks and IPSEC

Post by steven » Sat, 05 Aug 2000 04:00:00


Thanks a lot Frank,

this is a good starting point for us.
I didn't saw it on the web page and our customer didn't tell.
The main problem is that most IPSEC-Implementation need sourcecode from the IP-Stack.
Maybe they found a solution with Windriver or they implemented it a different way.
If there is someone out there who uses the stack for VxWorks, please give me a signal.

Torsten

http://www.windriver.com/cgi-bin/corporate/tradeWinds/viewProd.cgi?id...

if this is not what you're looking for, just go to the windriversite
(http://www.wrs.com/) and search for ipsec

Frank

Quote:> Hi VxWorkers,

> we need an IPSEC-Implementation for VxWorks (Tornado2).
> Does somebody know where we can get a solution ?

> Regards,
> Torsten

--

**************************************************************************
fraunhofer institute of microelectronic circuits and systems
department sat

address    finkenstrasse 61          phone      +0049/203/3783-238
           47057 duisburg            fax        +0049/203/3783-266
           germany
internet   http://www.ims.fhg.de and http://www.inhaus-nrw.de
**************************************************************************

 
 
 

1. IPSec on VxWorks

I checked the VxWorks FAQ but didn't find anything to address this.

We're using VxWorks in a VoIP application and I'm interested in finding
compatible IPSec implementations; I've heard that WindRiver has
something in the works but I can't seem to get a hard answer about when
it's going to be available. At this point I'm mainly looking for
information on resource utilization (memory footprint, processing
latency etc.) and licensing etc.

Anyone used IPSec with VxWorks, like Intoto's, or another 3rd party
vendor or anything else?  Anyone have any more information about
WindRivers implementation?  Anybody have any information about this at
all?

Thanks .... N
--

===================================
Nou Dadoun
Polycom Canada
1000 West 14th Street
North Vancouver, BC, Canada V7P 3P3
phone: 604.990.5415 x 136
fax:   604.990.5475

2. yaspic version 1.0

3. VxWorks & IpSec

4. DEC Threads to POSIX threads translation layer?

5. IPsec on VxWorks

6. Lan to serial null modem cable

7. Please Help - HP Scanjet 4c ands NT

8. Games needed.

9. About IPsec

10. IPSEC

11. Questions of WindNet IPSEC

12. MSN dialup and IPSEC/VPN

13. Vendors that provide IPSec?