by : Our office has had a Windows for Workgroups network with an NT
: server for about a year now. Up to this point we've been using
: can't get it properly reconfigured. The NT 3.5 server can be
... stuff deleted ...
: seen by all the workstations and vice versa. The NT server also
: appears to see the LaserJet because it shows up in the list of
: possible connections in Print Manager (along with LPT1, LPT2,
: etc.). However when we install a printer driver in NT and try to
: print to it nothing ever comes out of the LaserJet. We ran the
: diagnostics on the printer and it shows that its 10 Base T
: connection is valid (as does our hub). But nothing we've done
: has gotten our NT server to print to it...
: Help!
: -Bruce
Hi,
My experience with this is limited (one successfull after one failure :)),
but I think NT forgets the details of the connection, the important ones
like the Ethernet address of the LaserJet. Go into Printer
Properties, in the Control Panel, Printers, and then when you press Details,
you should find a list box that has the address of your printer card.
I think? ;-)
--
Doug Stanfield "The significant problems we face cannot be solved
Oceanic Cable at the same level of thinking we were at when we
Project Engineer created them." - Albert Einstein