Very Computer

1) Has anyone hooked an analog caller ID device to either POTS port
and received CallerID information without any configuration of the
SBP?

2) I have enabled CallerID logging on the SBP and the log indicates
that I don't have CID service. Is there any additional configuration
to the SBP to get CallerID logging to work?

3) Is there any other things I can do to verify that GTE is not
sending me the CID information?

4) Can anyone tell me what I should ask GTE check to verify that there
is no CID information on my ISDN line ? ( Other than GTE verifing that
CID has been enabled at the Central Office. )

Any help would be appreciated.

Make sure the date and time is set correctly on your BSP.  I was getting
"invalid data" on my analog device until this was done.

--
Brian Jones

Quote:

>Make sure the date and time is set correctly on your BSP.  I was getting
>"invalid data" on my analog device until this was done.

-------------------------------------------------------------------------------

UUCP      : wb3ffv!howardl              |       ABSnet Internet Services
PHONE     : (410)-361-8160              |       200 E. Lexington Street
FAX       : (410)-361-8162              |             Suite-1602

WWW       : http://www.abs.net          |