Fritz Card PCI

Fritz Card PCI

Post by maurycy wider » Wed, 20 Aug 2003 22:41:45



hello!

I couldn't install fritz card pci:
I'm using Redhat 9

I couldn't install fritz card.
--/proc/pci--
  Bus  0, device   9, function  0:
    Network controller: AVM Audiovisuelles MKTG & Computer System GmbH A1
ISDN [
      IRQ 12.
      Non-prefetchable 32 bit memory at 0xe6020000 [0xe602001f].
      I/O at 0x9400 [0x941f].
---end /proc/pci

IRQ 12 is not shared with any other card.

insmod -f fcpci
---cut--
/lib/modules/2.4.21-grsec/misc/fcpci.o: init_module: Input/output error
---cut--

---dmesg---
fcpci: AVM FRITZ!Card PCI driver, revision 0.5.2
fcpci: (fcpci built on Aug 19 2003 at 13:29:04)
fcpci: Loading...
fcpci: Driver 'fcpci' attached to stack
kcapi: driver fcpci attached
fcpci: Auto-attaching...
PCI: Found IRQ 12 for device 00:09.0
fcpci: Error: Invalid parameters (base=0x9400, irq=12)
fcpci: Not loaded.
kcapi: driver fcpci detached
fcpci: Driver 'fcpci' detached
---end dmesg--

---capi.conf--
fcpci   -       -       0x9400  12      -       -
--------------

I've made capi20.conf too.

I downloaded and installed:
fcpci-suse8.2-03.11.02.tar.gz

depmod -a -v   outputs that's everything is allright:
--cut--
user function /lib/modules/2.4.21-grsec/misc/fcpci.o
/lib/modules/2.4.21-grsec/misc/fcpci.o
-------

what i am doing wrong?

--
maurycy