TMA for ScanMaker 9600XL

TMA for ScanMaker 9600XL

Post by Rafael Wagen » Tue, 14 Mar 2000 04:00:00

Hi there!

I'm going to buy the transparent media adaptor (tma)
for the ScanMaker 9600XL.
Has anyone made some experience with it?
Is it also possible to scan 35mm film with it or
can't the negative material be fixed between tma and
the glass surface of the scanner?

How is the standard handling of reflective materials
(a normal scan) with the tma attached to the scanner?

many thanks in advance



TMA for ScanMaker 9600XL

Post by mad.. » Sat, 18 Mar 2000 04:00:00

Microtek should give you ScanWizard Pro so you can
select either Reflective, Transparency, or
Negetives.  TMA does attach to your scanner and
you should get a template for the slides.  Also,
there is black mat to cover the photos while you
are doing a reflective scans.  I haven't try it
yet, but the in the manual, it seems like it's
easy to do.


Sent via
Before you buy.


1. Scanmaker 4 TMA Problem

I have a Microtek Scanmaker4, Adaptec SCSI interface, Win98SE,
ScanWizard 2.54, which has suddenly quit scanning slides and negatives.
When trying to preview in ScanWizard, the scanner shifts into
transparency mode and then ScanWizard displays the error:

Code: -704, Media (adapted equipment like ADF, TMA and film holder) not
available.   [OK]

Have tried uninstalling and reinstalling everything (software, scanner
and Adaptec card), to no avail.  Microtek tech support hasn't offered
any effective solutions either.  Any ideas would be greatly
appreciated.  Thanks!

Dave Rennie

2. Need working definition of observed power

3. Pinning of TMA-port of Scanmaker E6

4. Official AT&T statement re service disruption in Houston, TX

5. Adaptec USB2XCHANGE & Microtek 9600XL

6. Nokia 9210-terminal???

7. Microtek 9600XL and win2k problems

8. VPN recommendations?

9. Microtek 9600XL scanner

10. Need Scanmaker 330 info (was: Buy Scanmaker E3 or E6)

11. Help? Microtek Scanmaker E3 - or - Mickrotek Scanmaker v310

12. Difference between Microtek ScanMaker E3 and ScanMaker V300

13. Help ? Need TMA Pinout for Mustek MFS-12000 (25 pin Dmf) TMA connector