1. Using 4.10 servers with same license # on same net for a short while ??
I am building a new server for our network. To make things easy, is it
possible to do as follows ??
1. Configure and install the new server, so that Netware 4.10 SYS volume is
up and running, using our running license
2. Configure a DATA volume on the new server
3. Connect new server physically to the network, i.e. 2 servers, same name
?, same license?
4. Copy all data from old to new server
5. Disconnect old server
Best regards
Lars P. Magnussen
2. Memory/Hardware/Win98 Problems?
3. Using 4.11 licenses on a 4.10 server
4. Using iosFdNew in a NPT sockets back end.
5. Can you connect to NW 4.10 servers using NETX.EXE?
6. IBMs UDF 2.1.1 and daniatapi issues
7. HELP, Install 4.10 on Intel N440BX board don't load SCSI drivers
8. Suggestions w/ 2940UW configuration (please!)
9. NW 4.1 server can only see 64MB RAM on Intel MB with 128MB.
10. Upgrading 3.12 to 4.10, already have one 4.1 server
11. Upgrading 3.12 to 4.10, already have a 4.1 server.
12. Installing a netware 4.11 server with a 4.10 server
13. Backing up remote 4.10 servers from 4.11 server