Very Computer

I tested my server for an open relay, and these were the results. It's
seem's to be an open relay.
I have a exhange2000 on a win2k server.

I checked out technet, and I configured my default smtp virtual server as
follows
    -relay optoins: only the list below : 192.168.0.0 255.255.255.0
    -checked the option allow al computers wich suc............

I configured my connector as follows
    - tab address space: type=smtp , address = *
                                    checked out: allow messages to be
relayed.........

And yet I am an open relay, can anyone tell wich configuration I forgot to
check

Thanks for any help.

-> DATA
<- 354 Start mail input; end with <CRLF>.<CRLF>

-> Sending test data (Relaying the e-mail)
-> .
<- 250 2.6.0

mail for delivery
-> RSET
<- 250 2.0.0 Resetting

-> RCPT TO: <"nobody%msv.dk">

-> DATA
<- 354 Start mail input; end with <CRLF>.<CRLF>

-> Sending test data (Relaying the e-mail)
-> .
<- 250 2.6.0

mail for delivery
-> RSET
<- 250 2.0.0 Resetting

Quote:>I configured my connector as follows
>    - tab address space: type=smtp , address = *
>                                    checked out: allow messages to be
>relayed.........

Quote:>And yet I am an open relay, can anyone tell wich configuration I forgot to
>check

--
Rich Matheisen
MCSE+I, Exchange MVP
MS Exchange FAQ at http://www.swinc.com/resource/exch_faq.htm

Quote:

> >I configured my connector as follows
> >    - tab address space: type=smtp , address = *
> >                                    checked out: allow messages to be
> >relayed.........

> Does "checked out" mean you put a check in the box, or that the box
> has no checkmark in it?

Quote:

> >And yet I am an open relay, can anyone tell wich configuration I forgot
to
> >check

> It's possible that the AD settings are not being transferred to the
> metabase.bin file. Try restarting the System Attendant service

> --
> Rich Matheisen
> MCSE+I, Exchange MVP
> MS Exchange FAQ at http://www.swinc.com/resource/exch_faq.htm