scsi problems on 735 running hpux 10.01 - crash - help

scsi problems on 735 running hpux 10.01 - crash - help

Post by Patrick Wo » Fri, 16 Aug 1996 04:00:00



Hi!

I am having problems with my hpux 735 running hpux 10.01. The system
runs very slow and sometimes hangs when users run cc and ftp large files.
I think it has to do with running processes that do large amount of disk
access/writes.

Any help would be appreciated.

Here is the output from ioscan:

# ioscan

H/W Path   Class                  Description
=============================================
           bc
1          graphics               Graphics
2          ba                     Core I/O Adapter
2/0/1             ext_bus         Built-in SCSI
2/0/1.5              target
2/0/1.5.0               disk      MICROP  4110-09TBCU0322J
2/0/1.6              target
2/0/1.6.0               disk      HP      C2247
2/0/2             lan             Built-in LAN
2/0/3             hil             Built-in HIL
2/0/4             tty             Built-in RS-232C
2/0/5             tty             Built-in RS-232C
2/0/6             ext_bus         Built-in Parallel Interface
2/0/7             ext_bus         Built-in F/W SCSI
2/0/8             audio
4          ba                     EISA Adapter
8          processor              Processor
9          memory                 Memory  

Here is what I get from dmesg:

# /etc/dmesg
Aug 15 18:55
  inet_clts:ok  inet_cots:ok 1 graph3
2 bus_adapter
2/0/1 c700
2/0/1.5 tgt
2/0/1.5.0 sdisk
2/0/1.6 tgt
2/0/1.6.0 sdisk
2/0/2 lan2
2/0/3 hil
2/0/4 asio0
2/0/5 asio0
2/0/6 CentIf
2/0/7 c720
2/0/8 audio
4 eisa
8 processor
9 memory

    System Console is on the ITE
Networking memory for fragment reassembly is restricted to 2641920 bytes
    Swap device table:  (start & size given in 512-byte blocks)
        entry 0 - auto-configured on root device; start = 1910784, size = 139294
    Defaulting dump to primary swap
    Dump device table:  (start & size given in 1-Kbyte blocks)
        entry 0 - major is 31, minor is 0x6000; start = 992254, size = 32768

Starting the STREAMS daemons.
    B2352B HP-UX (B.10.01) #1: Mon May 22 23:11:40 PDT 1995

Memory Information:
    physical page size = 4096 bytes, logical page size = 4096 bytes
    Physical: 32768 Kbytes, lockable: 18376 Kbytes, available: 23920 Kbytes

SCSI: humoring - bus = 0x0, tgt = 0x5, sbcl = 0x21, spc = 0xaf8
SCSI: bus timeout - bus = 0x0
SCSI:   dev: 1f005000
        cdb: 28 00 00 00 da a0 00 00 10 00
        residual: 2000
        status: (400) None -- Incomplete

SCSI:   dev: 1f006000
        cdb: 28 00 00 1d e3 f0 00 00 20 00
        residual: 4000
        status: (400) None -- Incomplete

SCSI:   dev: 1f006000
        cdb: 28 00 00 1d 28 c0 00 00 08 00
        residual: 1000
        status: (400) None -- Incomplete

SCSI:   dev: 1f005000
        cdb: 28 00 00 00 da 80 00 00 10 00
        residual: 2000
        status: (400) None -- Incomplete

SCSI: Host initiated bus reset - bus = 0x0
SCSI: humoring - bus = 0x0, tgt = 0x5, sbcl = 0xa2, spc = 0x950
SCSI: bus timeout - bus = 0x0
SCSI:   dev: 1f005000
        cdb: 28 00 00 00 da c0 00 00 10 00
        residual: 2000
        status: (400) None -- Incomplete

SCSI: Host initiated bus reset - bus = 0x0
SCSI:   retry_cnt: 1
        status: (02) Check Condition
        sense data: 70 00 06 00 00 00 00 14 00 00 00 00 29 00 00 00
                    00 00 00 00 00 00 00 00 00 00 00 00
        sense key: (06) Unit Attention
        additional sense code: (29)
        additional sense code qualifier: (00)
SCSI:   retry_cnt: 1
        residual: 0
        status: (00) Good
SCSI:   retry_cnt: 1
        residual: 0
        status: (00) Good

SCSI:   retry_cnt: 1
        residual: 0
        status: (00) Good

SCSI:   retry_cnt: 2
        residual: 0
        status: (00) Good

SCSI:   retry_cnt: 2
        residual: 0
        status: (00) Good

SCSI: humoring - bus = 0x0, tgt = 0x5, sbcl = 0x21, spc = 0xaf8
SCSI: bus timeout - bus = 0x0
SCSI:   dev: 1f005000
        cdb: 28 00 00 00 8c e0 00 00 10 00
        residual: 2000
        status: (400) None -- Incomplete

SCSI:   dev: 1f006000
        cdb: 2a 00 00 1d 8a f0 00 00 10 00
        residual: 2000
        status: (400) None -- Incomplete

SCSI:   dev: 1f006000
        cdb: 2a 00 00 1d 8a d8 00 00 10 00
        residual: 2000
        status: (400) None -- Incomplete

SCSI:   dev: 1f005000
        cdb: 28 00 00 00 8c c0 00 00 10 00
        residual: 2000
        status: (400) None -- Incomplete

SCSI: Host initiated bus reset - bus = 0x0

SCSI:   retry_cnt: 1
        status: (02) Check Condition
        sense data: 70 00 0b 00 00 00 00 0a 00 00 00 00 4e 00 00 00
                    00 00
        sense key: (0b) Aborted Command
        additional sense code: (4e)
        additional sense code qualifier: (00)

SCSI:   retry_cnt: 1
        status: (02) Check Condition
        sense data: 70 00 06 00 00 00 00 14 00 00 00 00 29 00 00 00
                    00 00 00 00 00 00 00 00 00 00 00 00
        sense key: (06) Unit Attention
        additional sense code: (29)
        additional sense code qualifier: (00)

SCSI:   retry_cnt: 1
        residual: 0
        status: (00) Good

SCSI:   retry_cnt: 1
        residual: 0
        status: (00) Good

SCSI:   retry_cnt: 2
        residual: 0
        status: (00) Good

SCSI: humoring - bus = 0x0, tgt = 0x5, sbcl = 0x20, spc = 0xaf8

SCSI:   dev: 1f005000
        cdb: 2a 00 00 11 8c 00 00 00 10 00
        residual: 2000
        status: (400) None -- Incomplete

SCSI:   retry_cnt: 2
        residual: 0
        status: (00) Good

SCSI:   retry_cnt: 1
        residual: 0
        status: (00) Good  

--

+---------------------------------------------------------------------------+

| Unix Systems Administrator, MIS                      Tel:  (416) 496-2200 |
| Hummingbird Communications, Ltd.                                 Ext 2233 |
| 1 Sparks Ave. Toronto, Canada. M2H 2W1               Fax:  (416) 496-2207 |
+---------------------------------------------------------------------------+