by Jürgen Krie » Fri, 26 May 2000 04:00:00
I have a big Problem with my hp9000. The workstation can't boot.
After the line
/sbin/ioinitrc
then the system reports:
INIT: SINGLE USER MODE
su: your own ID is unkown
[...] loops
What ca I do ??????
Thanks - Robert L?narz
1. hpux 10.01-run program at boot up; print to PC printers
Hi all,
we have a HP-9000/809 running hp-ux 10.01. we want to start a
certain program whenever the system boots up. Should we do it
by adding an entry in inittab or by adding the necessary scripts
into /etc/init.d and /etc/rc.config.d?
Also, the hp-9000 server in on the same LAN with dozens of win95
PCs. Some PCs have a HP LJ 6M connected at the parallel port. Can
the hp-9000 be setup to send print jobs to those printers without
using additional HW like JetDirect?
thanks for any comments and advice.
-al
2. Hundreds of Thousands Plunged
3. How to boot HPUX 10.01 on a 712/60 with non-HP CD-ROM drive
4. MSN 8 And Peer-To-Peer Network Problems
5. Kernel panic when booting (HPUX 10.01)
6. NEC 4x8X CD-ROM Changer Manual
7. Problem telneting to HPUX v B.10.01
8. large sparse matrix to be solved repeatedly
11. Problem with vogle and shared libs (HPUX 10.01)
12. scsi problems on 735 running hpux 10.01 - crash - help