I have 3 Hard disk that I like to move to the F/W SCSI
controller onboard my 735 without losing the LVM stuff.
Since I have all 7 devices connected to my SE SCSI-II,
I want to utilitze the F/W SCSI.
Is that possible?
Kev
by Ming S. Le » Fri, 17 Jan 1997 04:00:00
I have 3 Hard disk that I like to move to the F/W SCSI
controller onboard my 735 without losing the LVM stuff.
Since I have all 7 devices connected to my SE SCSI-II,
I want to utilitze the F/W SCSI.
Is that possible?
Kev
by Michael M Murphr » Sat, 01 Feb 1997 04:00:00
If you're using LVM, you should be able to use the PVMOVE command. CheckQuote:> I have 3 Hard disk that I like to move to the F/W SCSI
> controller onboard my 735 without losing the LVM stuff.
> Since I have all 7 devices connected to my SE SCSI-II,
> I want to utilitze the F/W SCSI.
> Is that possible?
> Kev
Good luck!
Michael M Murphree
1. 2nd SE SCSI interface on 735/99?
I know the 735/99 comes with a SE scsi and a differential scsi interface.
However, I really would like to add another SE SCSI channel. Is this possible?
What would the part # be for this beast? There are no other extra cards added,
so I have all my expansion slots available...
--
Mark Landin
T. D. Williamson, Inc.
UNIX Sys. Admin
"If you take the smooth, you gotta take the rough" -- Rob Halford
3. SE or DE SCSI on HP9000/735???
4. DSL with no incoming phone calls problem. PLEASE HELP!!!
5. SCSI-3 differential hard drive on HP 735/J210 fast wide differential
7. C160: F/W scsi bus & SE scsi bus: one and the same?
9. Installing non hp SCSI-II disks in a 9000
10. 735 workstation scsi disk too small for 10.20 - anyone with a loose 2 gig hdd?
11. HELP: Coexisting Wide and Narrow SCSI Disks on 735/755
12. HP 9000 can't see internal SCSI hard disks
13. Can a SCSI-2 boot disk be built for boot via SCSI-3 ?