: I have 2 A3000's one with a rev 7 motherboard and one with rev9 (first
: one has rom tower, 2nd one doesn't. I just tried to install 3.1 roms
: (A330 kit) into the latter beast. I found that the socket under 2.04
: rom 1 was labeled rom 0 and so on. After various attempts which resulted
: in yellow and blue screens (not simultaneously) I attempted to reinstall
: my 2.04 roms. Now I get a grey screen and nothing else.
: System has 2 chip/4 fast SCZ.
Do NOT trust the labeling under the ROM Sockets on the A3000!
They are INCORRECT!
They labeled ROM 0 as ROM 1 and vice versa!
Use the docs supplied with the ROM upgrades and check the U181 & U180
labels on the motherboard.
(and of course, make SURE you don't put them in backwards or bend pins!)
BTW- on the Rom Tower unit- place the chips on the ROM Tower and replace
the Tower as originally installed.
-----------------------------------------------------------------------------
Barry Einstein | Certified Apple Specialist
My other computer is an Amiga! | 5 West 20th Street,NYC NY 10011
| (212) 463-8585 ext. 209
-----------------------------------------------------------------------------