Very Computer

by **AUGUST. JAMES** » Wed, 27 Mar 1996 04:00:00

Does nyone know if a NEC 2A multisync will work on a Amiga 1200/4000?

What freq can they accept?

James :-)

by **Michael van El** » Wed, 27 Mar 1996 04:00:00

Quote:>Does nyone know if a NEC 2A multisync will work on a Amiga 1200/4000?

Sort of.

Quote:>What freq can they accept?

It is a bi-sync that supports 31.5kHz and 35kHz. That means that you
have to use Dbl or Productivity display modes.

Regards,
--
Michael van Elst

"A potential Snark may lurk in every tree."

by **Dave Gent** » Wed, 27 Mar 1996 04:00:00

Quote:>>Does nyone know if a NEC 2A multisync will work on a Amiga 1200/4000?
>Sort of.
>>What freq can they accept?
>It is a bi-sync that supports 31.5kHz and 35kHz. That means that you
>have to use Dbl or Productivity display modes.

I tried every mode and could only get Multisync Productivity to work.
None of the Dbl modes would work. It's kinda weird since both
monitors before it (I and II) and the monitor after it (3D) would sync
to all AGA frequencies. And Moned 2 didn't help at all.

I now have an NEC II which, I'm happy to say, does all the modes. The
only drawback is the large black borders. This can be helped with
Moned, but it doesn't completely eliminate them. The only mods that
fill the monitor are the 15khz modes (NTSC and PAL).

Good luck,

D. G.

by **Michael van El** » Thu, 28 Mar 1996 04:00:00

>>It is a bi-sync that supports 31.5kHz and 35kHz. That means that you
>>have to use Dbl or Productivity display modes.
>I tried every mode and could only get Multisync Productivity to work.
>None of the Dbl modes would work.

Did you install the VGA_only driver too ?

Quote:>I now have an NEC II which, I'm happy to say, does all the modes.

Yes, the NEC II can do this.
--
Michael van Elst

"A potential Snark may lurk in every tree."