Hi. I have the following items for sale:
-Exabyte 8200 2.3 gigabyte 8mm tape drive
-2.3 gigabytes per tape
-8mm tapes (very inexpensive compared to 1/4")
-$5 == 2.3 gigabytes for 8mm, $23 == 250 meg 1/4"
-SCSI
-6 months old
-5.25" full height (internal)
-manual
-$1400
-Archive Python 2 gigabyte DAT tape drive
-brand new
-2 gigabytes per tape
-DAT tapes (very inexpensive comapred to 1/4")
-$7 == 2 gigabytes for DAT, $23 == 250 meg 1/4"
-ANSI DDS
-SCSI
-manual
-5.25" half height (internal)
-$1300
-Sun 4/110 FCE SPARC
-16 megs of RAM (expandable to 32)
-1.2 gigabyte SCSI hard drive
-2.3 gigabyte SCSI tape drive
-8 bit color frame buffer (cg4 with bw2)
-Sony 16" flatscreen color monitor (best monitor ever made :)
-Sun type 4 keyboard
-SPARC processor
-Floating Point Accelerator (FPA)
-4 MegaFLOPS (MFLOPS)
-SCSI controller
-1 free VME slot
-2 serial ports
-ethernet connectors: thinnet and AUI
-SunOS 4.1.1b
-X11R5 patch level 9
-OpenWindows
-I'll put a ton of PD software on the disk as well
-buyer pays shipping
-$7000
This system works flawlessly.
-23 megs of SIMMs
-256Kx8 (Mac, Amiga, ...)
-I would like to trade the whole bunch for 8 megs of 70ns SCRAM ZIPs
for the Amiga 3000
-that comes out to about $9/meg
-Seagate ST225N 20 meg SCSI
-20 megs
-SCSI
-5.25" half height
-stiction problem
-5.25" half height (internal)
-manual
-$30
-MFM <-> SCSI protocol conversion boards
-I have 2
-handles multiple drives
-$50 each
-16 256Kx4 120ns DIPs (2 megs total)
-CMOS, 256Kx4
-$35/meg
-$50 for 2 megs
-8 1Mx1 100ns DIPs (1 meg total)
-$35
-72 256Kx1 150ns DIPs (2 megs total)
-$25 / meg (36 chips)
-$45 for 2 megs
-ISA AT 16 bit 2 meg RAM card
-ApparAT RAM card
-no manual
-I don't have a PC to test it on
-$35 with 0K
-$55 with 2 megs (72 256Kx1 listed above)
-NEC PC8023 9 pin dot matrix
-good condition
-print head needs to be replaced (one pin sticks)
-manual
-$45
-internal 880K Amiga floppy
-out of alignment
-$25
-ethernet cabling
-RG58 (cheapernet, thinnet)
-thicknet
-'T' connectors, terminators, segments
-rackmount case
-can be used to hold 2 full height drives
-power supply may not do 2 full heights, but it does do 1 plus
an Emulex ESDI<->SCSI conversion board.
-$45
-AT&T drive/tape enclosure
-large cooling fan
-48VDC transformer -> 12VDC, 5VDC
-space for 2 full height 5.25" drives
-$35
Purchaser must pay shipping. I will consider trades for: Amiga 3000 RAM,
hardware/software, Hi8 or regular 8mm tapes or other worthwhile items (??? :).
Thanks, Ralph
arbortext.com!atipit!gilgalad
Ann Arbor, MI 48108 Home: (313) 677-3086