by JoeMc » Sat, 12 Jul 2003 23:36:56
Type: Error
Source: Service Control Manager
Event ID: 7011
Description: Timeout (30000 milliseconds) waiting for a transaction
response from the InoRT service.
It occured 3 times within a couple minutes and the server bogged way down in
speed.
Running SBS2000
What would cause this?
JoeMcc
by Derek Hurco » Sun, 13 Jul 2003 19:37:44
Derek.
by Dirk-Thomas Brow » Sat, 19 Jul 2003 13:06:35
Dirk-Thomas
Quote:> While moving some files the following error occured.....
> Type: Error
> Source: Service Control Manager
> Event ID: 7011
> Description: Timeout (30000 milliseconds) waiting for a transaction
> response from the InoRT service.
> It occured 3 times within a couple minutes and the server bogged way down
in
> speed.
> Running SBS2000
> What would cause this?
> JoeMcc
1. Event ID: 7011 driving me nuts
Since the birth of our NT4 Network, July of 97... Event ID 7011 pops up on
reboot and goes through TWO 120000ms timeouts while waiting for transaction
response before completing restart adding 4 long minutes to every Server
restart. The original Network installers we canned after a competence issue
1 week into setup. Due to current litigation it is very difficult to
determine what they did, however since Event 7011 has become part of my life
does anyone know it's origin and how to get rid of this seamingly harmless
yet time consuming (Service Control Manager) error. While on the subject of
'Service Control Manager' errors Event ID 7026 "The following boot-start or
system start driver(s) failed to load: Sermouse. Can I simply disable this
in 'Devices'? This is not the first time for this one, however I was not
involved in the original resolution.
Quick Server Overview: Digital Prioris XL 6200 NT4 SP3 PDC File and
Application server on a small 15 node LAN-WAN. Exchange and Proxy Server
were installed but later removed (re: above competence issue). Any
assistance in resolving these issues, especially 7011 will be greatly
appreciated. Also primary protocol is TCP-IP.
Regards, Wayne Wall (nottawannabeadministrator)
2. Export Mac Eudora Messages to Windows Eudora
3. Event ID 7009 followed by Event ID 7000
4. How to get object from frame window handle
5. Event ID 10200 & Event ID 10201
6. system(2) call seems to kill DCE threads
7. Event log Errors, NBF Event Id 9011 errors !!
9. Locating info about Event IDs from Event Viewer
10. 100's of "Event ID ( 9997 ) in Source ( MSExchangeMTA )..........." in event log.
11. Event ID: 1010 - Event Source: Perflib
12. Event Viewer Errors:Event ID 1000 and 1001 on SBS 2000
13. Event ID 1000 and 1202 Repeat Every 5 Minutes in the Event Log