GK2000, DI3000 inst. problems

GK2000, DI3000 inst. problems

Post by matt.. » Tue, 02 Jan 1990 13:07:00



I am trying to install GK2000, DI3000, metafiles and associated device
drivers on a HP 9000 550 with Tectronix 4113a, 4112a, and 4107
terminals.  

History:  First I compiled the drivers.  After a few modifications
(removing all the underscores from the C-subroutines names, switching
the byte order, aliasing getarg), everything compiled.  Then I tried
to run the demos.  They all worked fine except I get a core dump after
each one if I hit return when the demo stops.  If I use anything else,
the demo terminates normally.  
        I decided to install the GK2000 next.  I installed it and
tried it's demo programs.  The first one worked (the PVI one), the
second one choked and said:
        open error for error msg input file
        STOP *** GK2000 system error. Abnormal termination.

the third one choked and said:
        font file number 1      data/simplex.fnt  not found.
        STOP *** GK2000 system error. Abnormal termination.

I checked the file data/simplex.fnt and it was there and looked ok.
All the rest of the test programs had similar problems.

Is there anyone out there who has the same machine and has
successfully installed GK2000, DI3000 and associated driver programs?

Thanks...

Matthew Barnes

UUCP    {ihnp4,seismo,pur-ee,convex}!uiucdcs!uiucme!matthew
  -or-  {ihnp4,seismo}!uiucuxc!uiucme!matthew



 
 
 

1. IRIX inst. problem: gettext unresolved

Hello,

I would like to upgrade from gimp1.0.4 to the latest version gimp1.2.3
on my SGI, running IRIX6.5.14.
But the Makefile produces some errors, which I as not able to solve. I
installed additionally the gettext-package and also tried the configure
switch -with-included-gettext. But there is no difference.
I tried to pick out the linker command (which is shown on stdout) and
added the libintl.a library.

But all this is not the right way. So, as you see, I'm not an expert for
makefiles and solving installation  problems. Who has some ideas ? Any
hints would be helpfull !

-----------------------
ld32: ERROR   33 : Unresolved text symbol "gettext" -- 1st referenced by
about_dialog.o.
        Use linker option -v to see when and which objects, archives and
dsos are loaded.  
ld32: ERROR   33 : Unresolved text symbol "bindtextdomain" -- 1st
referenced by main.o.
        Use linker option -v to see when and which objects, archives and
dsos are loaded.  
ld32: ERROR   33 : Unresolved text symbol "textdomain" -- 1st referenced
by main.o.
        Use linker option -v to see when and which objects, archives and
dsos are loaded.  
ld32: ERROR   33 : Unresolved text symbol "dgettext" -- 1st referenced
by menus.o.
        Use linker option -v to see when and which objects, archives and
dsos are loaded.  
ld32: INFO    152: Output file removed because of error.
-------------------------

Many thanks, Juergen
--
________________________________________________________________________


                        Phone: +49(531)295-3248/2778            /_/_/_/
                        Fax  : +49(531)295-2640                   |/ DLR

Deutsches Zentrum fr Luft-und Raumfahrt | German Aerospace Center
Institut fr Flugsystemtechnik           | Inst. of Flight Research
Abt. Flugsimulation                      | Flight Simulation Dep.
Lilienthalplatz 7                        | Lilienthalplatz 7
D-38108 Braunschweig                     | D-38108 Braunschweig, Germany
________________________________________________________________________

2. Wet look

3. DI3000 PVI Metafile --> CGM or PS

4. Avagio Publishing

5. DI3000 to XWindows conversion

6. What's meaning of dgl error

7. Convert Precision Visuals DI3000 to X

8. ram

9. PVI - DI3000 Installation

10. DI3000 (Graphics)

11. Pratt Inst. 3D Class Web Gallery

12. motif-inst.sh and Transfig : help !

13. PRATT Inst. 3D Modeling Class Web Gallery