Very Computer

sorry for the multimail, but having big big problems...

My Palm allways crashes and hangs even directly after a hard reset, and
before the first hotsync. I think That FlashPro missed up my Flash
Rom...
Now i Would like to reflash my Palm OS (I downloaded it some time ago
for the POSE).
But the Vx-FlshTool doesn't 'see' the palm in debug mode (working with
the advanced option of the upgrade util). The next button doesn't apear.
I think That it's a com-speed-problem. The palm stays in debug-Mode, and
does not crash in this mode. I tried both com-ports, a cradle and a
travel cable, endless resets, etc. no chance. I cna't start flashing,
because the next button does not appear. the tool doesn't recognize the
palm. But hotsyncing works...

The palm is half a year old. I hald Hotsync probs from the beginning on.
I had to turn down the communicatuion speed on the PC down to 38400. Is
there a way of setting the speed for the Flash-tool down? or could you
tell me another way to reflash the OS? Need help, can't use my Palm
anymore. Palm Support told me: By having used FlashPro, you have voided
your Warranty... (i really didn't know that before...) And in Newsgroups
i read, that FlashPro changes the Checksum of the OS, so I do not need
to send the Palm to support.

Thanks for your Help...

Good Luck..

--

"Carlis"
............................................................................
........

Quote:

> sorry for the multimail, but having big big problems...

> My Palm allways crashes and hangs even directly after a hard reset, and
> before the first hotsync. I think That FlashPro missed up my Flash
> Rom...
> Now i Would like to reflash my Palm OS (I downloaded it some time ago
> for the POSE).
> But the Vx-FlshTool doesn't 'see' the palm in debug mode (working with
> the advanced option of the upgrade util). The next button doesn't apear.
> I think That it's a com-speed-problem. The palm stays in debug-Mode, and
> does not crash in this mode. I tried both com-ports, a cradle and a
> travel cable, endless resets, etc. no chance. I cna't start flashing,
> because the next button does not appear. the tool doesn't recognize the
> palm. But hotsyncing works...

> The palm is half a year old. I hald Hotsync probs from the beginning on.
> I had to turn down the communicatuion speed on the PC down to 38400. Is
> there a way of setting the speed for the Flash-tool down? or could you
> tell me another way to reflash the OS? Need help, can't use my Palm
> anymore. Palm Support told me: By having used FlashPro, you have voided
> your Warranty... (i really didn't know that before...) And in Newsgroups
> i read, that FlashPro changes the Checksum of the OS, so I do not need
> to send the Palm to support.

> Thanks for your Help...

Quote:> When I bought it last christmas, I had big problems with the hotsync.
> Ist didn't start with the connection speed set to automatic on the pc.
> (But it took me quite a long time to figure this out...) While trying to
> get it work, I also tryed on my father's PC, had the same probs with the
> Hotsync, even with his cradle. Both PCs have win2k pro, but this is the
> only thing they have in common. I own a Pentim 233 MMX, Gigabyte board,
> and my fathe a PII 350 Asus board. I tryed with Win98SE on my pc too,
> same prob.

On Fri, 27 Apr 2001 22:21:08 +0200, "daniel.kasemann"