Board index FreeBSD

Target mode SCSI.

Target mode SCSI.

Post by ben » Thu, 05 Jul 2001 11:08:46



Hi,Folks,
        I am trying to connect two PCs via SCSI bus. Each PC is running
FreeBSD with a Adaptec 39160 SCSI card. I want to make one of them running
under target mode.I know I should use Justin's CAM interface. But I have no
idea where I should start.Do I need to change one of the card's jump setting
or something?How can I test the target mode? Any suggestions will be highly
appreciated.
Ben
 
 
 
Top

1. Looking for Target Mode SCSI adaptor to work w/ Linux

Hello,

     I am looking for the best FAST-20 Wide SCSI-PCI Host Adaptor that
will support Target Mode and, preferably, for which there are drivers
for Linux and that is well documented
( so that I can write/modify such drivers if need be.) This will be a
secondary bus.The
primary SCSI bus will be a DPT 2144UW which, according to e-mail I
received from DPT,
does not support Target Mode.

Thanks,
Marcelo

2. Driver for PDI7023 network card?

3. Target mode SCSI support

4. Linux Reboots for No Reason

5. SCSI Driver that Supports SCSI Target Mode

6. setting up a simple squid server

7. driver put scsi bus to target mode

8. HP Print Drivers StarOffice 5.2

9. SCSI target mode driver to virtual disk

10. SCSI target mode

11. Concern: Do SCSI Target mode drivers exist for Linux

12. SCSI Target mode

13. SCSI Target Mode


All times are UTC
Board index