Other groups

Other groups

Post by Greg Benjami » Fri, 28 Feb 1997 04:00:00

Are there ANY other newsgroups that deal with 56k technology??????


Other groups

Post by John Nav » Fri, 28 Feb 1997 04:00:00

[POSTED TO comp.dcom.modems]

>Are there ANY other newsgroups that deal with 56k technology??????

This is the place.

Best regards,

      28800 Modem FAQ:  http://www.aimnet.com/~jnavas/modem/faq.html


1. v2.2 Server sees others, others can't see it

Hello all,
  I had previously posted about how to set the internal network
address on a v2.2 server.  I'm not sure if this problem is related.
This is a dedicated v2.2 server that has been in service for over a
year.  After getting a few screens worth of "Router config error"
messages, it crashed.  Since that time, after the server boots, it
can't finish loading any VAPs, only a few commands will work on the
console prompt (reset router, track on/off, display servers/networks,
down, and config).  DISPLAY SERVERS after reset router will show other
servers talking to it, but the other servers can't see it.  Track on
shows that every once in a while, the problem server will respond to a
"Get nearest server" with a "Give nearest server", but SLIST and other
consoles still won't recognize it.  No hardware/software has been
changed to cause the problem.    Any suggestions/comments?
C. Myron Ware   Senior Prog/Analyst, CNE |    NASA Langley Research Center
Voice (804) 864-9250  Fax (804) 864-7676 |    13 Langley Blvd, MS 157B


2. SMS 2.0 Secondary Site Clients

3. Computer can see others, others cannot see it

4. NeXT Hardware Prices

5. Groups of groups with PIX.

6. Turing machines

7. Channel-Group Groups

8. Multiple isakmp policies (Group 1 and Group 2)

9. cisco vpn group keys issue: Is more groups the better?

10. channel-group AND pri-group on pri

11. ISDN pri-group and channel-group