If some one could help with the install I would appreciate it. If not,
anyone know how to contact Aspen on the internet?
by Edward Wilco » Wed, 18 Dec 1996 04:00:00
If some one could help with the install I would appreciate it. If not,
anyone know how to contact Aspen on the internet?
by J. Zawrotn » Wed, 18 Dec 1996 04:00:00
Aspen's customer service number (last I knew) was:
304-425-1111
ASPEN Technologies, Inc.
400 Rogers St.
Princeton, WV 24740
Good luck!
1. Installing X2 modem with a combo (sound/fax/modem) card
I have a Telecomander 3300 sound/fax/modem card in a DEC Starion 960 (not a
Packard Bell). Its 28.8 modem on com2(IRQ3). The sound part of the card
includes the usual:MPU-401 Device I/O port address 0300-301, IRQ 09; FM/OPLS
Device I/O Port address 0220-022F ,0530-0537 ,0388-038B, 0F8E-00F8F, IRQ 05,
DMA 00, 01. I tried to install an IBM 56K Modem Internet Kit while keeping the
combo card. The combo card has jumpers, so I could change the com port and
IRQ, but elected to keep it at the default. The IBM card is a ***PNP*** DSVD
voice/fax/modem; no jumpers. When I installed the IBM card it found com3.
Since it conflicted with com1, I disabled com1 in windows95. The modem worked
fine after that but I lost my sound. I looked in the device manager and for
some reason all the sound drivers were removed (not allowed to load I
suspect). Must be some kind of software conflict. ***Question*** Is there any
work around so I can keep the sound and use my new X2 modem at the same time?
Any help would be greatly appreciated. If you can, please email me directly.
Tim Harris
3. Packard Bell Data Fax & Sound Card???
4. tabcontrol with varying tab page sizes
5. Help on a combo Packard Bell Sound/Modem
6. Hunters Moon, does some one have it?
7. Packard Bell 14.4 Modem/Sound Card - How To Disable Modem Portion?
9. Aspen 28.8 Data/Fax/Voice Modem
10. Packard Bell 14.4 internal/sound card
11. packard bell modem/sound card-problem
12. Disable Packard Bell Modem/Sound Card <HELP>
13. Help IDing Packard Bell sound card/modem