Very Computer

I've got a new USR 28.8 internal modem with Plug'N'Play.  I'm trying
to use it with Trumpet Winsock in Windows3.11.  I've got the baud rate
set at 38400.  The initialization string I'm using is:

        at&fx4&b1&c1&d2&h1&k3&r2

I can get it to dial and connect, but then the connection drops off.
I can't open up any other programs.

I've tried to install the modem with the Plug'N'Play jumpers off, but
then the modem gets no response.

Do I need another init string?  Is the baud rate wrong?  Do I need to
run with or without the jumpers?

Thanks in advance!

: I've got a new USR 28.8 internal modem with Plug'N'Play.  I'm trying
: to use it with Trumpet Winsock in Windows3.11.  I've got the baud rate
: set at 38400.  The initialization string I'm using is:

:       at&fx4&b1&c1&d2&h1&k3&r2

: I can get it to dial and connect, but then the connection drops off.
: I can't open up any other programs.

: I've tried to install the modem with the Plug'N'Play jumpers off, but
: then the modem gets no response.

: Do I need another init string?  Is the baud rate wrong?  Do I need to
: run with or without the jumpers?

: Thanks in advance!

Sounds like you should check your name server and gateway addresses more
than your modem.  You can take the x4 and the &h1 out of your init
string, those are contained in &f1.

/-----------------------------------\

|           tech support            |
|    break out the blender and      |
|     mix me a spam margarita       |
\-----------------------------------/

Any extra input would be appreciated!