help!

help!

Post by COVERT THADDEUS » Wed, 03 Apr 1996 04:00:00



I don't know where the most appropriate place to post this is so I am
trying here.
I have just installed NetBSD1.1 on my A3000/50MHz ECS graphics 8M fast 2M
chip, scsi drisk driver(whatever comes in the 3000).
I got it to install and run, I put X-windows, emacs19.30 and kermit-5A on
it. I'm trying to install gcc2.7.2 on it but i run into errors:

/usr: write failed, file system is full
tar: couldn't write to file
/usr/local/gcc272/lib/g++-include/std/ldcomplex.h :no space left on device
usr/local/gcc272/lib/g++-include/std/sinst.h

I get this all the time. So I added another partition of 100M, and it
didn't get any farther in the installition process, in fact then I got a :

sd0(ahsc0:2:0):non-media hardware failure, data = 00 00 00 00 44 90 00 ....

I'm not sure how to check if I am actually out of space(which I think is
unlikely) or if there is another problem. This is what I did.

du /
returned :
232883 /   ----that includes ados

disklabel sd0
returned:
/dev/rsd0c:
type:scsi
disk: SCSI disk
label: swap
flags:
bytes/sector: 512
sectors/track: 94
tracks/cylinder: 559
cylinders: 3813
rpm: 3000
interleave: 1
track skew: 0
head switch: 0
track-to-track seek: 0

#   size   offset     fstype     [fsize   bsize    cps]
a: 32422   1118       4.2BSD      1024     8192     0     # (cyl. 2-59)
b: 67639  33540       swap                                # (cyl. 60-180)
c:2131467     0       unused         0        0           # (cyl. 0-3812)
d: 205153 101179      4.2BSD      1024     8192     0     # (cyl. 181-547)
e: 618254 306332      4.2BSD      1024     8192     0     # (cyl. 548-1653)
f: 205712 924586      4.2BSD      1024     8192     0     # (cyl. 1654-2021)
g: 899990 1231477 ADOS                                    # (cyl. 2203-3812)

disklabel: boot block size 0
disklabel: super block size 0

the size of the partitions on my drive are
root    swap    usr    local   local2
15       33     100     301     100

block size: 1024

on boot
-------

sd0 at scsibus0: 1041 MB, 3457 cyl,6 head, 102 sec, 512 bytes sec
ahsc0 targ 6 lun 0:< Quantum LP525 950509405, 3.1 > SCSI2 0/direct fixed
sd1 at SCSIBUS:0 49 MB, 1219 cyl, 2 head, 41 sec, 512 bytes/sec
warning found rdb->secpercyl(559) != rdb->nsectors(94) * rdb->nheads(6)
warning lp->d_spacepercyl(5) not multiple of lp->d_ntracts(6)

then I tried:

du -s /
I got:
232889 /

so I don't know if when I partitioned my drive with 1024 byte blocks if
it messed up NetBSD so that it uses 2X the amount it should. But I don't
think I should be out of space, between local and local2(I don't know if
this is even being used) I have 401M to use, and I have installed
kermit,X11, emacs and nethack. I don't think this shoudl make me run out
of space. Anyway, before I re-partition my drive to 512 blocks and
re-install and re-configure everything I figured I'd ask to see if
anybody could tell me what my problem is.
Thank you in advance.

 
 
 

1. HELP HELP HELP HELP HELP HELP

I am doing an assignment and one othe queations is to find out how many
postings has there been this week can some one either just tell me or
tell me how to find out


2. Linux IRC Client

3. help help help help help help

4. cdrw

5. Xaw scrollbars within dialog box widgets HELP:HELP:HELP:HELP:HELP:

6. Problem with X

7. HELP HELP HELP HELP PLZ

8. tt

9. Help C program in linux help help help !!!!!!!

10. HELP -- HELP -- HELP -- HELP

11. HELP HELP HELP HELP!!!!!!

12. help help help help! please!

13. HELP HELP HELP HELP