how to make hpux boot disk from seagate oem disk?

how to make hpux boot disk from seagate oem disk?

Post by Powersta » Sun, 18 May 1997 04:00:00



hpux vers 2.0.5 , would like to make a boot disk from an oem drive, need
parameters. help gurus
PowerStar Inc. SUN/PPRO/SCSI/UPS/RACKMOUNT
800-209-5556 Maryland
HOME PAGE: http://www.digitalcity.com/powerstar

 
 
 

1. E250 internal disks: "Sun" disk vs "generic" Seagate disk

"Sun" disk:
  5404177-01 (printed on handle, what number this is?)
  Seagate number: ST318404LC

"generic" disk:
  Seagate number: ST318405LC

The format shows:

# format
Searching for disks...done

AVAILABLE DISK SELECTIONS:
       0. c0t0d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>

       1. c0t8d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>

       2. c0t9d0 <SEAGATE-ST318405LC-5063 cyl 18902 alt 2 hd 4 sec 474>

They both work, but with the generic disk, the disk indicator
light inside E250 is not lit. Do you know why and what should
I do (besides buying Sun disks) to make the light lit? The
generic disk is much cheaper (Sun disks cost about $800).

Thanks.

2. AcceleratedX 2.1 and Debian 1.2.2

3. what different between boot disk, root disk and emergency disk???

4. Crash iwth 9679 Nvidia driver

5. mouse wheel

6. Boot Disk, Rescue disk, Start-up Disk

7. AT&T 3b2 Users

8. Did anybody here use the equivalent Seagate FC disks in a Sun T3 disk array?

9. Pls help: Can't change disk type for Seagate ST34371W disks

10. How to config LILO on non-boot disk (b4 using it as boot disk)

11. *NEW* boot disk won't, *OLD* boot disk will!

12. copy boot disc to a replacement boot disc -