Full dmesg

Full dmesg

Post by Neophyt » Thu, 02 Mar 2000 04:00:00



OpenBSD 2.6 (GENERIC) #696: Tue Nov  2 01:46:05 MST 1999

cpu0: F00F bug workaround installed
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 134 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
BIOS mem  = 654336 conventional, 49283072 extended
real mem  = 49938432
avail mem = 42258432
using 635 buffers containing 2600960 bytes of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(dd) BIOS, date 06/21/96
bios0: diskinfo 0xe055800c cksumlen 1 memmap 0xe05580a8 pciinfo
0xe055812c apminfo 0xe0558148
apm0 at bios0: Power Management spec V1.1
apm0: APM engage (device 1): power management disabled (1)
apm0: AC on, no battery
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82437VX System (TVX)" rev 0x02
pcib0 at pci0 dev 7 function 0 "Intel 82371SB (Triton II) PCI-ISA" rev
0x01
pciide0 at pci0 dev 7 function 1 "Intel 82371SB (Triton II) IDE" rev
0x00: DMA, channel 0 wired to compatibility, channel 1 wired to
compatibility
atapiscsi0 at pciide0 channel 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 1 lun 0: <TOSHIBA, CD-ROM XM-6102B, 1106> SCSI0
5/cdrom removable
cd0: can use 32-bit, PIO mode 3, DMA mode 2
wd0 at pciide0 channel 0 drive 0: <WDC AC21600H>
wd0: can use 32-bit, PIO mode 4, DMA mode 2
wd0: 16-sector PIO, LBA, 1549MB, 3148 cyl, 16 head, 63 sec, 3173184
sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data
transfers)
cd0(pciide0:0:1): using PIO mode 0, DMA mode 2 (using DMA data
transfers)
wd1 at pciide0 channel 1 drive 0: <SAMSUNG SHD-3212A (APOLLO-4) AD>
wd1: can use 32-bit, PIO mode 0
wd1: 16-sector PIO, CHS, 407MB, 1002 cyl, 16 head, 52 sec, 833664
sectors
pciide0: channel 1 interrupting at irq 15
wd1(pciide0:1:0): using PIO mode 0
"Trident TGUI 9750 (3D Image)" rev 0xf3 at pci0 dev 9 function 0 not
configured
isa0 at pcib0
isadma0 at isa0
ep0 at isa0 port 0x300/16 irq 10: address 00:10:4b:99:8b:33, utp
(default utp)
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: TVGA 9750 (3DImage), 80 col, color, 8
scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
ep1 at isapnp0 "3Com 3C509B EtherLink III, TCM5095, PNP80F7, " port
0x210/16 irq 5: address 00:10:4b:99:8b:33, utp (default utp)
biomask c040 netmask c460 ttymask d4e2
pctr: 586-class performance counters and user-level cycle counter
enabled
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
fdcresult: timeout
fd0: timeout (st0 20<seek_cmplt> cyl 0)
fd0a: soft error reading fsbn 0
 
 
 

Full dmesg

Post by Neophyt » Thu, 02 Mar 2000 04:00:00


(I'm not sure what happened.  I posted this message first but it didn't
appear.  Sorry.)

I try installing a 3Com 3C509B-TPO and it appears as both ep0 and ep1,
although ep1 clearly labels it as a 3Com card.  What is happening?

The relevant lines from dmesg:

ep0 at isa0 port 0x300/16 irq 10: address 00:10:4b:99:8b:33, utp
(default utp)
ep1 at isapnp0 "3Com 3C509B EtherLink III, TCM5095, PNP80F7, " port
0x210/16 irq 5: address 00:10:4b:99:8b:33, utp (default utp)

I've taken out this card and I don't get any reference to ep*.  It's
only when this card is inserted that I get this double ep*.

If you need the whole dmesg, I'll post it as a reply. << Actually, the
first posting here.

What is happening?

 
 
 

Full dmesg

Post by Mari Donker » Thu, 02 Mar 2000 04:00:00



> (I'm not sure what happened.  I posted this message first but it didn't
> appear.  Sorry.)

> I try installing a 3Com 3C509B-TPO and it appears as both ep0 and ep1,
> although ep1 clearly labels it as a 3Com card.  What is happening?

I get exact the same thing with my 3COM card:

ep0 at isa0 port 0x300/16 irq 3: address 00:10:5a:38:ed:f7, utp (default utp)
sysbeep0 at pcppi0
ep1 at isapnp0 "3Com 3C509B EtherLink III, TCM5095, PNP80F7, " port 0x210/16 irq 5: address
00:10:5a:38:ed:f7, utp (default utp)

Doesn't hurt though: I simply use ep1 and forget about ep0...

Quote:

> The relevant lines from dmesg:

> ep0 at isa0 port 0x300/16 irq 10: address 00:10:4b:99:8b:33, utp
> (default utp)
> ep1 at isapnp0 "3Com 3C509B EtherLink III, TCM5095, PNP80F7, " port
> 0x210/16 irq 5: address 00:10:4b:99:8b:33, utp (default utp)

> I've taken out this card and I don't get any reference to ep*.  It's
> only when this card is inserted that I get this double ep*.

> If you need the whole dmesg, I'll post it as a reply. << Actually, the
> first posting here.

> What is happening?

 
 
 

Full dmesg

Post by Mari Donker » Thu, 02 Mar 2000 04:00:00



> (I'm not sure what happened.  I posted this message first but it didn't
> appear.  Sorry.)

> I try installing a 3Com 3C509B-TPO and it appears as both ep0 and ep1,
> although ep1 clearly labels it as a 3Com card.  What is happening?

I get exact the same thing with my 3COM card:

ep0 at isa0 port 0x300/16 irq 3: address 00:10:5a:38:ed:f7, utp (default utp)
sysbeep0 at pcppi0
ep1 at isapnp0 "3Com 3C509B EtherLink III, TCM5095, PNP80F7, " port 0x210/16 irq 5: address
00:10:5a:38:ed:f7, utp (default utp)

Doesn't hurt though: I simply use ep1 and forget about ep0...

Quote:

> The relevant lines from dmesg:

> ep0 at isa0 port 0x300/16 irq 10: address 00:10:4b:99:8b:33, utp
> (default utp)
> ep1 at isapnp0 "3Com 3C509B EtherLink III, TCM5095, PNP80F7, " port
> 0x210/16 irq 5: address 00:10:4b:99:8b:33, utp (default utp)

> I've taken out this card and I don't get any reference to ep*.  It's
> only when this card is inserted that I get this double ep*.

> If you need the whole dmesg, I'll post it as a reply. << Actually, the
> first posting here.

> What is happening?

 
 
 

Full dmesg

Post by Neophyt » Fri, 03 Mar 2000 04:00:00


Actually for me, I can't get either one to work so it's bothering me.
And I don't want the same card taking multiple IRQ's either.



> > (I'm not sure what happened.  I posted this message first but it
didn't
> > appear.  Sorry.)

> > I try installing a 3Com 3C509B-TPO and it appears as both ep0 and
ep1,
> > although ep1 clearly labels it as a 3Com card.  What is happening?

> I get exact the same thing with my 3COM card:

> ep0 at isa0 port 0x300/16 irq 3: address 00:10:5a:38:ed:f7, utp
(default utp)
> sysbeep0 at pcppi0
> ep1 at isapnp0 "3Com 3C509B EtherLink III, TCM5095, PNP80F7, " port

0x210/16 irq 5: address

- Show quoted text -

Quote:> 00:10:5a:38:ed:f7, utp (default utp)

> Doesn't hurt though: I simply use ep1 and forget about ep0...

> > The relevant lines from dmesg:

> > ep0 at isa0 port 0x300/16 irq 10: address 00:10:4b:99:8b:33, utp
> > (default utp)
> > ep1 at isapnp0 "3Com 3C509B EtherLink III, TCM5095, PNP80F7, " port
> > 0x210/16 irq 5: address 00:10:4b:99:8b:33, utp (default utp)

> > I've taken out this card and I don't get any reference to ep*.  It's
> > only when this card is inserted that I get this double ep*.

> > If you need the whole dmesg, I'll post it as a reply. << Actually,
the
> > first posting here.

> > What is happening?

 
 
 

1. dmesg error. iptables full, dropping packet

I got a lot of msg by issuing dmesg in my RH7.2 box, running IP-masq as the
gateway.
the computer is 64MB ram.

$free
             total       used       free     shared    buffers     cached
Mem:         61848      56476       5372          0      16816      14388
-/+ buffers/cache:      25272      36576
Swap:       208836      65744     143092

$cat /proc/sys/net/ipv4/ip_conntrack_max
4096

according to the netfilter FAQ that 4096 is standard for 64m Ram..
http://www.netfilter.org/documentation/FAQ/netfilter-faq-3.html#ss3.6

# from 'dmesg'

ip_conntrack: table full, dropping packet.
NET: 69 messages suppressed.
ip_conntrack: table full, dropping packet.
NET: 67 messages suppressed.
ip_conntrack: table full, dropping packet.
ip_conntrack: table full, dropping packet.
ip_conntrack: table full, dropping packet.
ip_conntrack: table full, dropping packet.
ip_conntrack: table full, dropping packet.
ip_conntrack: table full, dropping packet.
ip_conntrack: table full, dropping packet.
ip_conntrack: table full, dropping packet.
ip_conntrack: table full, dropping packet.
ip_conntrack: table full, dropping packet.
ip_conntrack: table full, dropping packet.
NET: 10 messages suppressed.
ip_conntrack: table full, dropping packet.
NET: 56 messages suppressed.
ip_conntrack: table full, dropping packet.
NET: 122 messages suppressed.

is there any way around this without add extra memory ?

James.Q.L

2. Can't ping my network from AIX/RS600 machine

3. dmesg doesn't show 'file system full' msgs

4. Please help a new-B

5. My dmesg is full of junk -- how do I clean up?

6. Level Domains DNS qestion. Help badly needed.

7. " File System full " error message : but the partition is not full.

8. sed substitution

9. filesystem full -> It's not full

10. Disk full on non-full disk???

11. "full disk", not full

12. /tmp full, swap full?

13. 5.6 x86: file system full message, but file system not full!