by Christopher Czette » Fri, 07 Apr 2000 04:00:00
i got a problem installing OpenBSD 2,6 on a server with an adaptech 7890
scsi-adapter on board.
the kernel message says somthing like "adaptec 7890 controller found
..... not configured"
can anyone help me on that problem?
thanx + k/r
christopher
by Dan McGrego » Fri, 07 Apr 2000 04:00:00
OpenBSD 2.6 does not support the 789x.Quote:> i got a problem installing OpenBSD 2,6 on a server with an adaptech 7890
> scsi-adapter on board.
> the kernel message says somthing like "adaptec 7890 controller found
> ..... not configured"
Yes. Download and install the 2.6-CURRENTQuote:> can anyone help me on that problem?
---
Sooner or later, generals will own you.
1. AIC 7890 & 7860 On-board SCSI Controllers
Linux Slackware 3.4
Kernel 2.0.30
Hello,
I have been looking at the Dell Poweredge 2300 with a view to
installing Linux. The PC has two on-board SCSI controllers - AIC 7890
and AIC 7860.
Are these controllers supported under Linux, and will Linux handle two
SCSI controllers in one PC ?
I am also considering a second processor in the Dell. Any problems ?
I would very much appreciate any helpful comments about these issues
or any other matter relating to the Dell Poweredge 2300.
Kind regards,
Paul Ainscough
( I have successfully installed Linux on a Dell Poweredge 2200 and
could use one of these if the 2300 is unsupported at present )
2. xdm, xterm and deleting: help
3. Adaptec 7890 on-board SCSI support?
4. IPFW sending ICMP_UNREACH_PORT
5. AIC 7890 & 7860 On-board SCSI Controllers
6. Demilitarized Zone (DMZ) and Linux
7. Adaptec 7890 SCSI Controller
9. Installing Linux with Adaptec 7890 SCSI controller.
10. Asus P2B-S motherboard with on-board Adaptec AIC-7890
11. RedHat 5.1 on On-board Adaptec 7890
13. Adaptec 7890 Ultra2 controller not recognized?