Termcap problems on dial-in....

Termcap problems on dial-in....

Post by Mark A. Pitch » Sat, 14 Jan 1995 03:52:05



        I'm running linux 1.1.45 (originally InfoMagic 1.1.18) with
termcap version 1.1.

        Wrong attributes are being used on characters for users
dialing-in. For example, sometimes the screen gets inversed. Sometimes
characters that are supposed to be inversed aren't (and characters that
aren't, are.) Sometimes everything works (for a while.)

        It doesn't matter if the term is set for ANSI, VT100, or VT102.
These little glitches still happen. Character placement works fine --
even for curses-based games.

        When I dial-in to my own system from the console (using a VT-100
emulator), everything works fine. It's only remote users who are having
this problem -- and it's all users with all different types of software
(so it's not their fault.)

        Anyone know what's going on, and how this can be fixed?

--
------------------------------------------------------------------------------
| Mark A. Pitcher |                                
------------------------------------------------------------------------------
                                                            "GUH!" - Bill Leeb

 
 
 

1. Problems with dialing out when dial-ins are enabled

I'm having trouble getting dial-outs to work when dial-ins are
enabled.  I can dial out on /dev/cua1 when getty isn't running
on /dev/ttyS1, but when getty is running I get a message that
the port I'm trying to dial-out on (/dev/cua1) is in use.  I
read the FAQs and everything seems to be set up right.  What
am I doing wrong?  

[I'm running SLS 1.02 (0.99pl9).]
--
Eric Dittman                  Texas Instruments - Component Test Facility

Disclaimer:  Not even my opinions.  I found them by the side of the road.

2. filename and grep

3. Dial-in termcap problem

4. malloc Errors

5. supraexpress modems (28.8) problems w/dial-ins

6. HELP printing from AIX 4.2

7. dial ins

8. nawk error msg.

9. PPP dial-ins refused, OSR-5 with net100

10. Setting up firewall for dial-ins: How?

11. Can't get dial-ins, anyone?

12. HELP WITH DIAL INS

13. pppd dial ins and , "LCP: timeout sending Config-Requests"