by -----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
-----------------------------------------------------------------
**REVISED 11** HEWLETT-PACKARD COMPANY SECURITY BULLETIN: #0184,
Originally issued: 12 Feb. 2002
Last revision: 11 June 2002
-----------------------------------------------------------------
The information in the following Security Bulletin should be acted
upon as soon as possible. Hewlett-Packard Company will not be
liable for any consequences to any customer resulting from customer's
failure to fully implement instructions in this Security Bulletin as
soon as possible.
------------------------------------------------------------------
PROBLEM: Vulnerabilities in SNMP request and trap handling.
PLATFORM: HP 9000 Series 700 and Series 800 running HP-UX
releases 10.X and 11.X
HP Procurve switches
HP TopTools Remote Control Card
JetDirect Firmware
MC/ServiceGuard, EMS HA Monitors
Solaris running OpenView or NNM
Windows/NT running OpenView or NNM
DAMAGE: Possible denial-of-service, service interruptions,
unauthorized access.
SOLUTION: Apply patches or implement workarounds. See below.
For HP-UX releases:
PHSS_26510 s700_800 HP-UX 10.10, 10.01 Emanate 14.0
PHSS_26137 s700_800 HP-UX 10.20 OV EMANATE14.2 Agent
PHSS_27181 s700_800 HP-UX 10.20 OV EMANATE14.2 Agent
PHSS_26367 s700_800 HP-UX 10.24 VirtualVault (VVOS)
PHSS_26138 s700_800 HP-UX 11.X OV EMANATE14.2 Agent
PHSS_27182 s700_800 HP-UX 11.X OV EMANATE14.2 Agent
PHSS_26368 s700_800 HP-UX 11.04 VirtualVault (VVOS)
PSOV_03087 Solaris 2.5.1, Solaris 2.6, Solaris 2.7
Solaris 2.8 EMANATE Release 14.2
PSOV_03162 Solaris 2.5.1, Solaris 2.6, Solaris 2.7
Solaris 2.8 EMANATE Release 14.2
PSOV_03113 Solaris 2.3, Solaris 2.4 Emanate Release 14.0
For systems running OV NNM install above SNMP
patches for HP-UX and Solaris in addition to the NNM
patches listed below.
For Windows/NT install:
NNM_00846 Windows NT4.0/4.01 Windows 2000
NNM_00909 Windows NT4.0/4.01 Windows 2000
NNM6.2
PHSS_26932 NNM 6.2 HP-UX 10.20
PHSS_26933 NNM 6.2 HP-UX 11.X
NNM_00890 NNM 6.2 Win NT/2k
PSOV_03144 NNM 6.2 Solaris 2.X
NNM6.1 Note: both patches are required.
PHSS_26918, PHSS_26908 NNM 6.1 HP-UX 10.20
PHSS_26919, PHSS_26909 NNM 6.1 HP-UX 11.X
NNM_00889, ECS_00011 NNM 6.1 Win NT/2k
PSOV_03143, PSOV_03142 NNM 6.1 Solaris 2.5,
2.6, 2.7, 2.8
NNM5.01
PHSS_26806 NNM 5.01 HP-UX 10.20
PSOV_03136 NNM 5.01 Solaris 2.X
NNM4.11
PHSS_26777 NNM 4.11 HP-UX 10.20
PSOV_03132 NNM 4.11 Solaris 2.X
MANUAL ACTIONS: Upgrade or workaround action per below.
AVAILABILITY: Patches for some affected systems are available now.
CHANGE SUMMARY: Rev.01 affected HP Procurve scope expanded,
plus Procurve patch availability added.
NNM ovtrapd patch availability added.
Rev.02 SG and EMS found not vulnerable.
Rev.03 JetDirect vulnerability updated
Rev.04 NNM 5.X and VVOS patches, vulnerability note
for Solaris, and Windows NT.
Rev.05 VVOS patch ID typo.
Rev.06 Updating NNM 5.X section, HP OC SS7 added
Rev.07 Added OpenView product status list
Rev.08 Added NNM 5.01 and 4.11 patches for HP-UX
and Solaris
Rev.09 New NNM 6.1 and NNM 6.2 patches, additional
Emanate patches, and TopTools Remote
Control Card information
Rev.10 Additional Emanate and NNM patches.
-->>Rev.11 PHSS_27181,PHSS_27182, are only found on:
http://support.openview.hp.com/cpe/patches/
------------------------------------------------------------------
A. Background
CERT has issued an advisory:
CERT Advisory CA-2002-03 Multiple Vulnerabilities in Many
Implementations of the Simple Network Management Protocol
(SNMPv1) containing information about the vulnerabilities.
Hewlett-Packard Company will revise this bulletin as new
information becomes available.
---------------------------------------------------------
hp Procurve switches
---------------------------------------------------------
We are still in the process of determining which other HP
Procurve products are subject to these vulnerabilities.
We have created fixes for products below which will resolve
these issues. See Section C below.
Customers can download these patches in the form of software
upgrades at:
http://www.hp.com/rnd/software/switches.htm
Product Fix revision number
---------------------------------- -------------------
HP Procurve Switch 2524 (J4813A) F.04.08 or greater
HP Procurve Switch 2512 (J4812A) F.04.08 or greater
HP Procurve Switch 4108GL (J4865A) G.04.05 or greater
HP Procurve Switch 4108GL-bundle (J4861A) G.04.05 or greater
Not all HP Procurve products have completed testing, nor are
they listed here, and may or may not have these vulnerabilities.
This bulletin will again be updated as new information becomes
available.
---------------------------------------------------------
HP TopTools Remote Control Card
---------------------------------------------------------
TopTools Remote Control (TTRC) card, rev. 2.0. (product P1218A)
has an SNMP MIB defect.
---------------------------------------------------------
NNM (Network Node Manager)
---------------------------------------------------------
Some problems found in NNM product were related to trap
handling. Patches are available. See Section C below.
---------------------------------------------------------
JetDirect Firmware
---------------------------------------------------------
JetDirect Firmware Version State
========================== =====
X.08.32 and lower VULNERABLE
(where X = A through K)
X.21.00 and higher NOT vulnerable
(where X = L through P)
----------------------------------------------------------
HP-UX Systems running snmpd or OpenView
----------------------------------------------------------
Any HP-UX 10.X or 11.X system running snmpd or snmpdm is
vulnerable. To determine if your HP-UX system has snmpd
or snmpdm installed:
swlist -l file | grep snmpd
----------------------------------------------------------
Other systems running OpenView or NNM
----------------------------------------------------------
Solaris and Windows/NT systems running OpenView or NNM
are vulnerable.
----------------------------------------------------------
OpenView Product Status
----------------------------------------------------------
NNM Vulnerable
Patches in process
Note:
Patches for NNM 6.2, NNM 6.1,
NNM 5.01, NNM 4.11, and Emanate
are complete.
Patches for NNM 5.02 and NNM 6.01
are in process.
NNM also ships Emanate SNMP Agents
so patches for Emanate SNMP Agents
should also be applied (See section
"C. Recommended solution" below).
----------------------------------------------------------
ITO/VPO/OVO on Vulnerable
Unix Patches in process
Note:
This product bundles the NNM and
Emanate Agents with it. Appropriate
NNM and Emanate Agent patches should
also be applied. (See section
"C. Recommended solution" below).
----------------------------------------------------------
OVO Windows Under Investigation
VPW/OVO Windows Note:
OVO bundles the NNM and Emanate
Agents with it. Appropriate NNM and
Emanate agent patches should also be
applied. (See section
"C. Recommended solution" below).
----------------------------------------------------------
Extensible Agent Vulnerable
(EA) Patches released
HP-UX 10.01, 10.10
- PHSS_26510
HP-UX 10.20 - PHSS_26137
HP-UX 11.0 - PHSS_26138
Solaris 2.5.1, 2.6, 2.7, 2.8
- PSOV_03087
Solaris 2.3, 2.4
- PSOV_03113
----------------------------------------------------------
Emanate SNMP Agents Vulnerable
Patches releases
HP-UX 10.01, 10.10 - PHSS_26510
HP-UX 10.20 - PHSS_26137, PHSS_27181
HP-UX 11.X - PHSS_26138, PHSS_27182
Solaris 2.5.1, 2.6, 2.7, 2.8
- PSOV_03087, PSOV_03162
Solaris 2.3, 2.4
- PSOV_03113
NT - NNM_00846, NNM_00909
----------------------------------------------------------
SAM builder Under Investigation
----------------------------------------------------------
SAM allocator Under Investigation
----------------------------------------------------------
SAM accountant Under Investigation
----------------------------------------------------------
SAM optimizer Under Investigation
----------------------------------------------------------
SAM SNM Under Investigation
----------------------------------------------------------
SA (Service Assurance) Under Investigation
----------------------------------------------------------
OEMF Under Investigation
----------------------------------------------------------
DM Under Investigation
----------------------------------------------------------
B. Fixing the problem
Install the appropriate patch or firmware revision or work
around problem as detailed below.
C. Recommended solution
---------------------------------------------------------
hp Procurve switches
---------------------------------------------------------
Customers can download these patches in the form of software
upgrades at:
http://www.hp.com/rnd/software/switches.htm
Product Fix revision number
----------------------------------- -------------------
HP Procurve Switch 2524 (J4813A) F.04.08 or greater
HP Procurve Switch 2512 (J4812A) F.04.08 or greater
HP Procurve Switch 4108GL (J4865A) G.04.05 or greater
HP Procurve Switch 4108GL-bundle (J4861A) G.04.05 or greater
---------------------------------------------------------
NNM (Network Node Manager)
---------------------------------------------------------
Problems found in the NNM 6.1 and NNM 6.2 products are
addressed in patches available at:
http://support.openview.hp.com/cpe/patches/nnm/
Note: The NNM 6.2 patches listed in previous revisions
of this bulletin only addressed trap handling. The
following patches address all NNM 6.2 vulnerabilities.
PHSS_26932 s700_800 HP-UX 10.20 all fixes
PHSS_26933 s700_800 HP-UX 11.X all fixes
PSOV_03144 Solaris 2.X all fixes
NNM_00890 NT 4.X/Windows 2000 all fixes
PHSS_26918, PHSS_26908 NNM 6.1 HP-UX 10.20
PHSS_26919, PHSS_26909 NNM 6.1 HP-UX 11.X
NNM_00889, ECS_00011 NNM 6.1 Win NT/2k
PSOV_03143, PSOV_03142 NNM 6.1 Solaris 2.5,
2.6, 2.7, 2.8
Note: For NNM 6.1 both patches are required.
For NNM 5.01, and 4.11 (HP-UX and Solaris versions only) see
the list below, and obtain the patches from:
http://support.openview.hp.com/cpe/patches/nnm/nnm.jsp
NNM 5.01
--------
HP-UX 10.20 PHSS_26806
Solaris 2.X PSOV_03136
NNM 4.11
--------
HP-UX 10.20 PHSS_26777
Solaris 2.X PSOV_03132
Patches for NNM 5.02 and NNM 6.01 are in process.
This bulletin will be updated when new patches are available.
---------------------------------------------------------
MC/ServiceGuard
---------------------------------------------------------
MC/ServiceGuard is not affected. Testing has been completed
and neither MC/ServiceGuard nor ServiceGuard OPS Edition are
negatively impacted.
The ServiceGuard Manager product does not use the cluster
SNMP and remains unaffected.
---------------------------------------------------------
Event Monitoring System (EMS)
---------------------------------------------------------
Testing of the MC/ServiceGuard or ServiceGuard OPS Edition
application with package resources defined using EMS High
Availability Monitors has been completed and shows no
vulnerability to this issue.
---------------------------------------------------------
HP TopTools Remote Control Card
---------------------------------------------------------
TopTools Remote Control (TTRC) card, rev. 2.0. (product P1218A)
has an SNMP MIB defect. This is fixed in firmware version
B.03.02 available at:
http://h20004.www2.hp.com/keeper_rnotes/bsdmatrix/matrix62319.html
---------------------------------------------------------
JetDirect Firmware
---------------------------------------------------------
JetDirect Firmware Version State
========================== =====
X.08.32 and lower VULNERABLE
(where X = A through K)
X.21.00 and higher NOT vulnerable
(where X = L through P)
FIX STATUS: HP is working on a firmware fix.
WORKAROUND: Change the set-community-name and use the
Access Control List as described in "HP JetDirect Print
Servers - Making HP JetDirect Print Servers Secure on
the Network":
http://www.hp.com/cposupport/networking/support_doc/
bpj05999.html#P88_10129
LIMITING THE VULNERABILITY
SNMPv1 security relies on the set community name. It is
important that a set-community-name be configured on the
JetDirect device and that it be kept secret.
JetDirect Print Servers offer an Access Control List that
can be used to specify which hosts can make SNMP
configuration changes to JetDirect Print Servers.
The steps above can help prevent exploitation of the
vulnerability. To eliminate the vulnerability before a fix
is available SNMP can be disabled on the JetDirect device.
DISABLING SNMP ON A JETDIRECT PRINT SERVER
1. Update the firmware to the highest level as described in
the JetDirect Upgrade Instructions document:
http://www.hp.com/cposupport/networking/support_doc/bpj06917.html
NOTE: Disabling SNMP may affect device discovery and port
monitors that use SNMP to get status on the device.
Use this feature with care.
2. Telnet to the JetDirect device (on the latest firmware)
and type:
snmp-config: 0
quit
This will completely disable SNMP on the JetDirect device.
HP always recommends upgrading JetDirect firmware for the
latest bug fixes and security benefits. The upgrade firmware
and download utility are available free of charge:
http://www.hp.com/cposupport/networking/support_doc/bpj06917.html
The following is a list of JetDirect Product Numbers
that can be freely upgraded to X.08.32 or X.21.00 or
higher firmware. The latest firmware revision available
for download is given. For example, the latest firmware
revision for the J3110A is G.08.32.
EIO (Peripherals LaserJet 4000, 5000, 8000, etc...)
J3110A 10T [G.08.32]
J3111A 10T/10B2/LocalTalk [G.08.32]
J3112A Token Ring (discontinued) [G.08.32]
J3113A 10/100 (discontinued) [G.08.32]
J4169A 10/100 [L.21.22]
J4167A Token Ring [L.21.25]
J6057A 10/100 [R.22.09]
MIO (Peripherals LaserJet 4, 4si, 5si, etc...)
J2550A/B 10T (discontinued) [A.08.32]
J2552A/B 10T/10Base2/LocalTalk (discontinued) [A.08.32]
J2555A/B Token Ring (discontinued) [A.08.32]
J4100A 10/100 [K.08.32]
J4105A Token Ring [K.08.32]
J4106A 10T [K.08.32]
LIO (Peripherals Color InkJet cp1160, cp1700)
J6042A 250m 10/100 [N.21.22]
External Print Servers
J2591A EX+ (discontinued) [E.08.32]
J2593A EX+3 10T/10B2 (discontinued) [D.08.32]
J2594A EX+3 Token Ring (discontinued) [D.08.32]
J3263A 300X 10/100 [H.08.32]
J3264A 500X Token Ring [J.08.32]
J3265A 500X 10/100 [J.08.32]
J6038A 310x USB 10/100 [Q.22.04]
----------------------------------------------------------
HP-UX Systems running snmpd or OpenView
----------------------------------------------------------
The following patches are available now:
PHSS_26510 s700_800 HP-UX 10.10, 10.01 Emanate 14.0
PHSS_26137 s700_800 HP-UX 10.20 OV EMANATE14.2 Agent
PHSS_27181 s700_800 HP-UX 10.20 OV EMANATE14.2 Agent
PHSS_26367 s700_800 HP-UX 10.24 VirtualVault (VVOS)
PHSS_26138 s700_800 HP-UX 11.X OV EMANATE14.2 Agent
PHSS_27182 s700_800 HP-UX 11.X OV EMANATE14.2 Agent
PHSS_26368 s700_800 HP-UX 11.04 VirtualVault (VVOS)
PSOV_03087 Solaris 2.5.1, Solaris 2.6, Solaris 2.7
Solaris 2.8 EMANATE Release 14.2
PSOV_03162 Solaris 2.5.1, Solaris 2.6, Solaris 2.7
Solaris 2.8 EMANATE Release 14.2
PSOV_03113 Solaris 2.3, Solaris 2.4 Emanate Release 14.0
For systems running OV NNM install above SNMP
patches for HP-UX and Solaris.
For Windows/NT install:
NNM_00846 Windows NT4.0/4.01 Windows 2000
NNM_00909 Windows NT4.0/4.01 Windows 2000
**REVISED 11**
-->>PSOV_03087, PSOV_0162, NNM_00846, NNM_00909, PSOV_03113,
-->>PHSS_27181, PHSS_27182 are available from:
http://support.openview.hp.com/cpe/patches/
PHSS_26367 and PHSS_26368 available from:
http://itrc.hp.com
PHSS_26510, PHSS_26137, and PHSS_26138 are available
from both sites.
The HP OC SS7 (OpenCall) products J3362A and J5938A running
on HP-UX releases 10.20 and 11.X are not vulnerable if the
applicable HP-UX patch listed above is installed.
============================================================
NOTE: The patches are labeled OV (OpenView). However, the
patches are also applicable to systems that are _NOT_
running OpenView.
============================================================
Workaround for HP-UX Systems:
If a patch is not available for your platform or you cannot
install an available patch, snmpd and snmpdm can be disabled
by removing their entries from /etc/services and removing the
execute permissions from /usr/sbin/snmpd and /usr/sbin/snmpdm.
D. To subscribe to automatically receive future NEW HP Security
Bulletins from the HP IT Resource Center via electronic
mail, do the following:
Use your browser to get to the HP IT Resource Center page at:
http://itrc.hp.com
Use the 'Login' tab at the left side of the screen to login
using your ID and password. Use your existing login or the
"Register" button at the left to create a login, in order to
gain access to many areas of the ITRC. Remember to save the
User ID assigned to you, and your password.
In the left most frame select "Maintenance and Support".
Under the "Notifications" section (near the bottom of
the page), select "Support Information Digests".
To -subscribe- to future HP Security Bulletins or other
Technical Digests, click the check box (in the left column)
for the appropriate digest and then click the "Update
Subscriptions" button at the bottom of the page.
or
To -review- bulletins already released, select the link
(in the middle column) for the appropriate digest.
To -gain access- to the Security Patch Matrix, select
the link for "The Security Bulletins Archive". (near the
bottom of the page) Once in the archive the third link is
to the current Security Patch Matrix. Updated daily, this
matrix categorizes security patches by platform/OS release,
and by bulletin topic. Security Patch Check completely
automates the process of reviewing the patch matrix for
11.XX systems.
For information on the Security Patch Check tool, see:
http://www.software.hp.com/cgi-bin/swdepot_parser.cgi/cgi/
displayProductInfo.pl?productNumber=B6834AA"
The security patch matrix is also available via anonymous
ftp:
ftp.itrc.hp.com:~ftp/export/patches/hp-ux_patch_matrix
On the "Support Information Digest Main" page:
click on the "HP Security Bulletin Archive".
E. To report new security vulnerabilities, send email to
security-al...@hp.com
Please encrypt any exploit information using the
security-alert PGP key, available from your local key
server, or by sending a message with a -subject- (not body)
of 'get key' (no quotes) to security-al...@hp.com.
Permission is granted for copying and circulating this
Bulletin to Hewlett-Packard (HP) customers (or the Internet
community) for the purpose of alerting them to problems,
if and only if, the Bulletin is not edited or changed in
any way, is attributed to HP, and provided such reproduction
and/or distribution is performed for non-commercial purposes.
Any other use of this information is prohibited. HP is not
liable for any misuse of this information by any third party.
________________________________________________________________
-----End of Document ID:
HPSBUX0202-184--------------------------------------
-----BEGIN PGP SIGNATURE-----
Version: PGP for Business Security 5.5
iQA/AwUBPQdXCOAfOvwtKn1ZEQK7QgCg8hPr5ng2rCWKQWMxk/EY2jD5bSsAnjW1
/Ros0nbS+5gCMSNc7o5T7DI/
=w3rI
-----END PGP SIGNATURE-----
Reply-to: security-al...@hp.com
--