Bootrom code for FADS-860 board.

Bootrom code for FADS-860 board.

Post by Subodh Nijsu » Sun, 03 Dec 2000 09:16:23



Is there a place where I can download bootom code for FADS-860 boards?

/Subodh

 
 
 

Bootrom code for FADS-860 board.

Post by Subodh Nijsu » Sun, 03 Dec 2000 14:01:35




>Is there a place where I can download bootom code for FADS-860 boards?

Found it at sourceforge.net, ignore this message

/Subodh

 
 
 

Bootrom code for FADS-860 board.

Post by Wolfgang Den » Sun, 03 Dec 2000 04:00:00





>>Is there a place where I can download bootom code for FADS-860 boards?

>Found it at sourceforge.net, ignore this message

Just for all the others: the PPCBoot project is at
http://ppcboot.sourceforge.net/ , and if you can't access the CVS
server at sourceforge you can download tarballs from
ftp://ftp.denx.de/pub/ppcboot

PPCBoot has been ported to many  different  platforms  based  on  the
MPC8xx,   MPC82xx,  and  IBM  40x.  Ready-to-run  configurations  are
available for (F)ADS8xx, MBX8xx, TQM8xxL,  ADCIOP,  Cogent,  CPCI405,
ETX_094, GENIETV, HYMOD, IVMS8, SPD8xxTS, and Sandpoint boards.


Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux

I can't say I've ever been lost, but I was bewildered once for  three
days.                                     - Daniel Boone (Attributed)

 
 
 

1. RedHat edk 1.0 (linux) on MBX 860 board

Hi,
    I am trying RedHat edk 1.0 on MBX 860 board. My host is redhat 6.2
    linux.

   I was able to compile the kernel and get zImage and httpd demo
  program compiled using source navigator for the target.

  After that when i boot up the MBX to get the zImage , i am not able
  boot the kernel itself.. It shows the error message:

 <cut>
 EPPC-Bug>pl 20 0
 Network Booting from: MPC860, Controller 20, Device 0
 Loading: Operating System

 Client IP Address      = 192.168.254.15
 Server IP Address      = 192.168.254.3
 Gateway IP Address     = 0.0.0.0
 Subnet IP Address Mask = 255.255.255.0
 Boot File Name         = /tftpboot/192.168.254.15/zImage
 Argument File Name     =

 Bytes Received =&471790, Bytes Loaded =&405938
 Bytes/Second   =&235895, Elapsed Time =2 Second(s)
 loaded at:     00210000 00204AA4
 relocated to:  00100000 000F4AA4
 board data at: 00FF4558 00FF4580
 relocated to:  00200100 00200128
 zimage at:     00216000 00271FD8
 avail ram:     00272000 01000000

 Linux/PPC load:
 Uncompressing Linux...done.
 Now booting the kernel
 </cut>

     And the target hangs..
     Anybody has any idea what's happening..

     thanx in advane.
     bye

2. NES 3.6 + Jrun 2.3 on aix

3. Need USED 860 / 8260 development board plus add-ons

4. AVM A PCMCIA isdn card

5. How to flash LINUX on PPC860 Evaluatoin Board (FADS)

6. Hacking the serial parity bit

7. How to config linux kernel for FADS board?

8. crappy monitors

9. Number Smasher-860

10. Future Domain TMC-860

11. Any one use NEC SuperScript 660 or 860 printer with Linux??

12. NEC SuperScript 860 driver?

13. NEC SuperScript 860 Printer on Linux...