G3 Processor Upgrade Card Crescendo G3/L2 1M

G3 Processor Upgrade Card Crescendo G3/L2 1M

Post by Oliver Pus » Fri, 03 Sep 1999 04:00:00



Hi,

does anybody have experience with the G3 Processor Upgrade Card Sonnet
Crescendo
G3/L2 1M/2:1 300 MHz BG3-300-1M for Performa 6400? Especially with
respect to LinuxPPC?

Oliver

--

   Dipl.-Ing. Oliver Stenzel              Holstenhofweg 85
  Universitaet der Bundeswehr                22043 Hamburg
 Institut fuer Stroemungslehre      Tel.: +49-40-6541-2167
    und Stroemungsmaschinen          Fax: +49-40-6541-2743

     http://www.unibw-hamburg.de/MWEB/iss/fsl/fsl.html

 
 
 

G3 Processor Upgrade Card Crescendo G3/L2 1M

Post by Karim Sulta » Fri, 03 Sep 1999 04:00:00


Hi,

  I have experience with the chip, it is a phenomenal upgrade
for any of the "slower" ppcs.  I have been quite happy with it;
however, I have not tried the G3 machine with LinuxPPC, only
Mac OS 8.6.  


> Hi,

> does anybody have experience with the G3 Processor Upgrade Card Sonnet
> Crescendo
> G3/L2 1M/2:1 300 MHz BG3-300-1M for Performa 6400? Especially with
> respect to LinuxPPC?

> Oliver

> --

>    Dipl.-Ing. Oliver Stenzel              Holstenhofweg 85
>   Universitaet der Bundeswehr                22043 Hamburg
>  Institut fuer Stroemungslehre      Tel.: +49-40-6541-2167
>     und Stroemungsmaschinen          Fax: +49-40-6541-2743

>      http://www.unibw-hamburg.de/MWEB/iss/fsl/fsl.html


 
 
 

1. Crescendo L2 G3 vs LinuxPPC

Has anyone installed the Crescendo L2 G3 upgrade? If so, could you
please share you experiences?

Will the extension load before BootX, allowing the G3 to be active when
BootX starts Linux?

Is the cache active?

Are there any problems.

Any and all information will be greatly appreciated.

--
Rick

2. Connecting to an Xserver?

3. Crescendo G3 upgrade card and Mklinux

4. NT and Linux, mouse selection in vi

5. LinuxPPC 5 with a G3/L2 upgrade card?

6. TEST, please ignore

7. MkLinux DR3 appears to work with Crescendo G3 cards

8. I Can′t find my source after installation

9. Crescendo G3 card and Mklinux?

10. L2 G3 upgrade vs LinuxPPC and MOL

11. Can't Startup YDL2.1 w/ Sonnett G3/L2 Upgrade

12. LinuxPPC on G3 L2 Cache upgrade?

13. Please Help: MESH and G3 L2 Card Conflict !?