by Mohamed Ibrahi » Thu, 04 Dec 1997 04:00:00
Hello,
I cannot relink the kernel after setting up a 2 gig scisi tape drive.
Getting the following errors..
Relinking Kernel...
The UNIX Operating System will now be rebuilt.
This will take a few minutes. Please wait.
Root for this system build is /
idmkreg: error updating space.c file for Stp
idmkreg: error updating space.c file for Stp
Anyone with a suggestion.. thanks.
by Jean-Pierre Radle » Thu, 04 Dec 1997 04:00:00
Mohamed Ibrahim telecommunicated (on 03Dec):
|
| I cannot relink the kernel after setting up a 2 gig scisi tape drive.
| Getting the following errors..
|
|
| Relinking Kernel...
|
| The UNIX Operating System will now be rebuilt.
| This will take a few minutes. Please wait.
|
| Root for this system build is /
|
| idmkreg: error updating space.c file for Stp
| idmkreg: error updating space.c file for Stp
There is a Technical Article on this. Serch for it on SCO's web page,
using idmreg and 5.0.2 as keywords.
--
1. Kernel Relink Problem (fwd)
I'm forwarding this message to the list for a friend. Any assitance is
greatly appreciated. Replies can be sent to:
or
Thanks!
Lance
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
When we attempt to relink our kernel in the sysadmsh, via System ->
Configure -> Kernel -> Rebuild, we get:
/./usr/include/sys/seg.h: 96: undefined control
ERROR: /etc/conf/pack.d/cr_uni/stubs.c will not compile properly
And, if we do a link_unix, we get:
/./etc/conf/cf.d/config.h: 115: undefined control
/./etc/conf/cf.d/config.h: 243: undefined control
/./etc/conf/cf.d/config.h: 381: undefined control
/./etc/conf/cf.d/config.h: 452: undefined control
/./etc/conf/cf.d/config.h: 504: undefined control
/./etc/conf/cf.d/config.h: 547: undefined control
/./etc/conf/cf.d/config.h: 686: undefined control
/./etc/conf/cf.d/config.h: 861: undefined control
/./etc/conf/cf.d/config.h: 923: undefined control
/./etc/conf/cf.d/config.h: 932: undefined control
/./etc/conf/cf.d/config.h: 979: undefined control
/./etc/conf/cf.d/config.h: 1079: undefined control
/./etc/conf/cf.d/config.h: 1102: undefined control
/./etc/conf/cf.d/config.h: 1163: undefined control
/./usr/include/sys/xdebug.h: 83: undefined control
/./usr/include/sys/xdebug.h: 97: undefined control
We have checked the stubs.c file against other systems, and it is
unchanged from the way it shipped from SCO. We tried renaming the
stubs.c file and removing it from the include list; however, the error
then occurs on another file in the /etc/conf/pack.d/cr_uni directory.
We assume our compiler is corrupt, as we had a kernel double-panic some
time back which corrupted several files. We believe the 'include' files
to be OK - we need some advice on where to look for the compiler so we
can check it (them) against other systems. At this time we are unable to
relink our kernel, thus preventing us from implementing upgrades and
tuning.
Dave Wood --------------------------------------------------------------
| Technology Consultant Phone: (219) 758-3141 |
| Region 8 Education Service Center FAX: (219) 758-3142 |
-----------------------------------------------------------------------
2. Z-shell (zsh) Frequently-Asked Questions
3. Help! Problem installing printer and relinking kernel
4. bash help...
6. looking for german.hash/ispell
7. Fatal Error in SCO UNIX Relink
8. Buy 180 MHz PPro or 200 MHz Pentium
9. Error relinking kernel after mkdev parallel
10. Relinking the kernel gives me -