Board index Sco Unix

hd_config error upgrading 5.02 to 5.04

hd_config error upgrading 5.02 to 5.04

Post by Nick Water » Wed, 06 Aug 1997 04:00:00



Hi, can anyone help me with the following error :

I'm trying to upgrade SCO 5.02 to 5.04 via upgrade feature,
by booting by supplied boot floppy ....

once booted i get the following error :

G hd_config
NOTICE : ciha : SCSI bus error on SCSI adaptor (ha=0 id=0 lun=0)
WARNING: hd : no root disk controller was found

... then when checking for suitability for automatic upgrade ...

NO ACTIVE UNIX PARTITION
cannot determine root filesystem location

Can anyone help me out ???...
do I have to use a specific defbootstr ???

Cheers

Nick Waters
Lead Programmer
RH Group Ltd

 
 
 
Top

1. Upgrade of 5.02 to 5.04 issues NFS, RSH login

(i) Previously it was possible to do an RSH without password.
After upgrade the RSH always requires password.
Any comments on how this may have been 'changed' during upgrade ?

(ii) NFS is failing to allow connection to a volume on local server.
Again this was fine before upgrade.
Any comment on NFS problems ?

Please copy replies to

Regards
Ian

2. _write; write

3. Upgrading from 5.02 to 5.04

4. Getting X3.1.2E patches

5. ATAPI CDROM Install 5.02 vs 5.04

6. Fast digital I/O card

7. Differences between SCO 5.02 and SCO 5.04

8. random number generator

9. SCO 5.02 + SCO 5.04

10. Restricting Multiple FTP Users on OS 5.02 or 5.04 ??

11. SCO 5.02 + SCO 5.04 Floppy Drive Problems

12. Upgrade SCO 3.2v4.2 - Openserver 5.02 installation core dump

13. Open Server 5.02 Upgrade Cheap


All times are UTC
Board index