Very Computer

by **Gary As** » Mon, 18 Dec 1995 04:00:00

I am trying install LLI drivers 3.4 in ODT 3.0 for my Etherlink III card,
but when I use CUSTOM, it says, "Cannot install as a separate package, must
be installed with full product." Or something like that. How can I get the
Etherlink III drivers loaded?
--
---------------------------------------------------
1. Earth is 98% full. Please delete anyone you can.
2. I came, I saw, I deleted all your files.
3. The world will end in 5 minutes. Please log out.

by **Bill At** » Tue, 19 Dec 1995 04:00:00

>I am trying install LLI drivers 3.4 in ODT 3.0 for my Etherlink III card,
>but when I use CUSTOM, it says, "Cannot install as a separate package, must
>be installed with full product." Or something like that. How can I get the
>Etherlink III drivers loaded?

This additional guidance was posted last March by Rick Hicks and worked
well for me and others:

> I posted this back in December 1994 but here it is again:

> I began using the SMC Elite Ultra Combo in our ODT 3.0 server a few
> months ago. Initially the machine wouldn't even work with the card in it.
> The solution, at least in my case, was the driver. I downloaded
> (ftp.sco.com - /EFS/efs140lli.Z and efs140llidoc.Z) the newest LLI drivers
> >from SCO. There is a problem, however, with the installation documentation.
> These were the instructions given to me from SCO support, and the card has
> worked fine ever since:

> remove the LLI drivers as specified in the doc.
> remove the file /etc/perms/lli
> edit the file /etc/perms/bundle/odtps - comment out the
> section (about three lines) concerning the LLI drivers
> now install the new LLI drivers as a new product

> Any other steps are to be done as listed in the doc.

> ________________________________________
> Rick Hicks
> Network Administrator
> Aviation Technologies
> Southern Illinois University

--

Very Computer

Q: additional LLI drivers for ODT 3.0

Q: additional LLI drivers for ODT 3.0

Q: additional LLI drivers for ODT 3.0