Very Computer

1. SCO ansi from Linux term?

Hi All

I have created a terminfo entry called linux on a OSR504 system to
enable me to run a character application served from the SCO box and to
use Linux PC's as terminals!

The terminfo is all but working except for 1 key.  The problem is with
my backspace key which is sending a destructive carriage return no
matter what I set it to on both the RedHat 6.1 Linux system and the SCO
OSR 504 system.  The terminfo source (with one of the many options I
have tried on kbs=) is below!  If anyone can help I would be most
grateful;-)

Thanks Simon

================== start of terminfo file
================================

#       Reconstructed via infocmp from file: /usr/lib/terminfo/l/linux
linux|Ansi standard crt for running an Rlogin-Telnet from a Linux
Console,
        am, eo,
        cols#80, lines#25,

        bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
        clear=\E[2J\E[H, cr=\r, cub1=\b, cud1=\n, cuf1=\E[C,
        cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,

        il1=\E[L, ind=\n, ka1=\E[F, kbs=^H, kc1=\E[Z,
        kclr=^Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
        kcuu1=\E[A, kdch1=\E[P, kf1=\E[[A, kf10=\E[21~,
        kf11=\E[W, kf12=\E[X, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
        kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
        kf9=\E[20~, khome=\E[H, kich1=\E[L, knp=\E[5~,
        kpp=\E[6~, rev=\E[7m, ri=\E[T, rmacs=\E[10m,
        rmso=\E[m, rmul=\E[m,

sgr=\E[1;10m%?%p6%t\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p9%t;12%;m%e\
E[1%?%p1%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p9%t;12%;m%;%?%p3%t\E[7m%;,
        sgr0=\E[1;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,

================ end of terminfo file =========================
--
 SIMON KEATES - EUROGRAPHIC INDUSTRIES LTD
==============================================

 WWW            http://www.eurographics.co.uk
 Telephone:     01794 500800 Fax: 01794 500801
==============================================
 See "The Hounds of The Morrigan" Home Page at
 http://www.the-morrigan.co.uk
==============================================

2. Looking for Summer Intership

3. SCO ANSI Term Emulation over TCP/IP (Also under dos)???

4. ypserv-2.2 Callback timed out

5. Need SCO-ANSI Term Program

6. Terminal Server Ports - RH5.2

7. SCO ANSI terminal vs. regular ANSI terminal

8. tar strangeness

9. Terminal ANSI ou SCO ANSI

10. SCO ANSI terminal vs. regular ANSI terminal

11. SCO-ANSI ANSI code?

12. biz.sco.* replaced by comp.unix.sco.*; biz.sco.* newsgroups removed.

13. Using SCO Unix drivers in SCO Xenix?