Quote:>From xenitec.on.ca!news Thu Aug 7 15:12:04 1997
Newsgroups: comp.unix.sco.misc
Path: xenitec!news
Subject: Re: sco-list: help, flow control OS5 w/ Oki ptrs
Content-Type: text/plain; charset=us-ascii
Organization: S.M. Fabac & Associates
Date: Wed, 6 Aug 1997 22:06:37 GMT
Mime-Version: 1.0
Content-Transfer-Encoding: 7bit
> >I would really appreciate any information on this one: We are running Open
> >Server 5.04b. We have a dumb digiboard (using the generic serial driver
> >from SCO) and an okidata 320 printer (non turbo). our problem is that, no
Good suggestions. I always use hardware flow control with printers so
that when a printer is "off" and a job is sent, the job is held until
the printer is powered up.
1) Set the Digi port to CTSFLOW using ditty CTSPACE < /dev/ttyaxx in
/etc/rc2.d/8/userdef Use the ttyaxx and not ttyAxx (Port tty2A is
NOT a Digi port, it is the dumb COM2 port.)
[snipped]
I beg to differ on the Digi port tty's,
this is probably just as Cindy wrote "a dumb digiboard" and
as such is either a 4 port or 8 port card. i.e tty1a-tty1d or for
modem control tty1A-tty1D (tty1a-tty1h etc for modem control) or
it is mapped to tty2x.
eric
***************************************************************************
- Beam me up Scotty - there's no intelligent life down here.-