SCO ODT 3 - Have a problem with HD Mount - Please Help

SCO ODT 3 - Have a problem with HD Mount - Please Help

Post by Faisal Kha » Thu, 23 May 1996 04:00:00



*Please reply at email address given below*



NEED URGENT HELP:
----------------

Any help in getting this /u mounted back would help me immensely.

I have added a Seagate ST32105N to my SCO ODT 3.0 box with dpt host
adapter card. After four days of working my system crashed with panic of
unexpected kernal trap and halted.

After reboot, the system did not mounted the file system '/u' on the
second harddisk with the message cannot stat fs_type of /dev/u.

One mistake which I have made at the time of adding harddisk was instead
of giving command
        'mkdev hd 1 0'

I gave command as follows

       'mkdev hd 1 1'

but system gave no error and proceeded with adding harddisk sucessfully.

Now after recovery of the system

divvy for /dev/hd11 shows following entries

u               NON FS          no      0       0       2090960
scratch         NON FS          no      6       2090961 2093054
hd11            Whole Disk      no      7       0       2095071

and divvy for /dev/hd10 shows following

d1150           NON FS          no      0       0       2090960
                Not UsedO       no      6       2090961 2093054
d1157all        Whole Disk      no      7       0       2095071

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Javaid Irfan                            
 Network Administrator                  
 Bear Stearns Jahangir Siddiqui Limited
 Karachi - Pakistan.

 Ph: 92-21-243-1181, fax:92-21-243-1178

 
 
 

1. Please Help - Need help in mounting HD on SCO ODT 3

*Please reply at email address given below*



NEED URGENT HELP:
----------------

Any help in getting this /u mounted back would help me immensely.

I have added a Seagate ST32105N to my SCO ODT 3.0 box with dpt host
adapter card. After four days of working my system crashed with panic of
unexpected kernal trap and halted.

After reboot, the system did not mounted the file system '/u' on the
second harddisk with the message cannot stat fs_type of /dev/u.

One mistake which I have made at the time of adding harddisk was instead
of giving command
        'mkdev hd 1 0'

I gave command as follows

       'mkdev hd 1 1'

but system gave no error and proceeded with adding harddisk sucessfully.

Now after recovery of the system

divvy for /dev/hd11 shows following entries

u               NON FS          no      0       0       2090960
scratch         NON FS          no      6       2090961 2093054
hd11            Whole Disk      no      7       0       2095071

and divvy for /dev/hd10 shows following

d1150           NON FS          no      0       0       2090960
                Not UsedO       no      6       2090961 2093054
d1157all        Whole Disk      no      7       0       2095071

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Javaid Irfan                            
 Network Administrator                  
 Bear Stearns Jahangir Siddiqui Limited
 Karachi - Pakistan.

 Ph: 92-21-243-1181, fax:92-21-243-1178

2. PPTP ip_conntrack_pptp multiple clients problem

3. DHCP with SCO ODT 5 and SCO ODT 3?

4. Slrnpull and two newsservers?

5. Problem: installing 2nd scsi-hd on SCO ODT 3.0 Lite

6. zmodem: trouble w/ 'rz' from tip escape

7. ppp/chat to SCO ODT 3.0 help please...

8. ECS K7VMM vs K7SEM

9. 4GB Quantum HD and SCO ODT 3.0 -- is it possible?

10. SCO ODT v1.1 - ODT-VIEW Anomaly

11. PANIC on SCO ODT using ODT-DOS

12. !!!!!!!!!!!!!!!!!!!!!!HELP Mounting HD..... in SCO 504!!!!!!!!!!!!!!!!!

13. Mounting ODT 3 disks in ODT 5 - Best way ??