DOSEMU 0.60 with X11

DOSEMU 0.60 with X11

Post by Alexander Sirotk » Wed, 03 May 1995 04:00:00



I can't use dosemu 0.60 with X - all the keys (except Enter. Del,
F? and Arrow keys) don't work.

Any idea waht's the problem?

 
 
 

DOSEMU 0.60 with X11

Post by Alain Kna » Wed, 03 May 1995 04:00:00


: I can't use dosemu 0.60 with X - all the keys (except Enter. Del,
: F? and Arrow keys) don't work.

: Any idea waht's the problem?
 Try using the "keycode" keyword in your X line in dosemu.conf:

X { updatefreq 8 keycode title "DOS in a BOX" icon_name "xdos" }

--
 Alain

 
 
 

DOSEMU 0.60 with X11

Post by Uwe Bonn » Thu, 04 May 1995 04:00:00



> I can't use dosemu 0.60 with X - all the keys (except Enter. Del,
> F? and Arrow keys) don't work.

RTFM.
/etc/dosemu.conf:
X { updatefreq 8 title "DOS in a BOX" icon_name "xdos" keycode }
                                                       ^^^^^^^
--

Institut fuer Kernphysik  Schlossgartenstrasse 9  64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------

 
 
 

DOSEMU 0.60 with X11

Post by Michael Kell » Thu, 04 May 1995 04:00:00


In comp.os.linux.development.apps,

  EVERYBODY AND THEIR F***ING DUCK asks:

Quote:>I can't use dosemu 0.60 with X - all the keys (except Enter. Del,
>F? and Arrow keys) don't work.
>Any idea waht's the problem?

  Two problems:

      (1)  You didn't read the CHANGES file, nor the comments in the
           X section of the config file

      (2)  You also didn't bother to read the answer which was posted
           about a gazillion times in this newsgroup and c.o.l.x

NOW PAY ATTENTION:

  Change the line in your /etc/dosemu.conf from

X { updatefreq 8 title "DOS in a BOX" icon_name "xdos" }

  to

X { updatefreq 8 title "DOS in a BOX" icon_name "xdos" keycode }

--
Morals are for those too weak to have Ethics.
        Religion is for those too dumb to have a Philosophy.
                Politics is for those too unprincipled to have opinions.
M. Kellen

 
 
 

DOSEMU 0.60 with X11

Post by Eddy O » Wed, 10 May 1995 04:00:00



>NOW PAY ATTENTION:
>  Change the line in your /etc/dosemu.conf from
>X { updatefreq 8 title "DOS in a BOX" icon_name "xdos" }
>  to
>X { updatefreq 8 title "DOS in a BOX" icon_name "xdos" keycode }

Still, this doesn't help when displaying it on a Sun/SGI or whatever that
doesn't run XFree.  I'm back to 0.53pl43....

--
Eddy Olk                           Pattern Recognition Group

phone: +31-15-783538               Delft University of Technology
mail: P.O.Box 5046, 2600 GA Delft, The Netherlands
http://heaven.ph.tn.tudelft.nl/~eddy/ (under construction)

 
 
 

DOSEMU 0.60 with X11

Post by Stephen Wr » Thu, 11 May 1995 04:00:00



> >NOW PAY ATTENTION:

> >  Change the line in your /etc/dosemu.conf from
[snip]
> Still, this doesn't help when displaying it on a Sun/SGI or whatever that
> doesn't run XFree.  I'm back to 0.53pl43....

the X { updatefreq 8 title "DOS in a BOX" icon_name "xdos" keycode }
trick does *absolutely* no good for the problem where xdos becomes
*INERT* *INACTIVE* *BROKEN* after it has been iconized.

If the people who developed it did such a wonderful job of the icon,
WHY COULDN'T THEY HAVE GOT XDOS
TO ICONIZE AND UNICONIZE PROPERLY?????

Or am I the only person who has this problem?
(I must be, surely?)

 
 
 

1. Dosemu 0.60 and S3 card

I have a problem running dosemu 0.60.2 on a linux box with an S3 video card.
If I run dosemu with no graphic card enable in dosemu.conf, all works
without problem. If now I run dosemu with a graphic card enable, both vga
or S3, I boot dosemu, but if I start a program like edit, which uses a
VGA graphic mode, the program runs, but once I return to dos, the
keyboard doesn't work anymore except to switch the console, and I have to kill
dosemu. Without the graphic mode enable, I can run edit and return to dos
without problem. I suspect then the video driver for S3. I have try it
both on an orchid Fahrenheit S3 805 at home with a DX2486 with 1G. SCSI
and a S3 948 at work with a PCI P90 and 1G. SCSI , with the
same results
Anybody has experience with dosemu and S3 video card ???
        Thanks ?
                Marc    

2. Round Trip Time Checking and ...

3. WFW 3.11 and Dosemu 0.60

4. aic7xxx for 1.2.8

5. compiling dosemu 0.60

6. NEW DRIVE

7. DOSEMU 0.60 Make loop

8. Reading the user area in the process structure in kernel..

9. dosemu 0.60 problem booting

10. dosemu 0.60 problem :(

11. Problem compiling DOSEMU 0.60

12. keyboard error under DOSEMU 0.60

13. **** DOSEMU 0.60: ps2 mouse slow...