What's happens with aha1542 driver since 1.2.13 ?

What's happens with aha1542 driver since 1.2.13 ?

Post by Oleg Bartun » Wed, 06 Dec 1995 04:00:00



Hello, I have one problem with recent kernels (1.3.42--1.3.45)
when I ftp big file (about 30Mb). Kernel complains about time out:
Nov 28 01:30:36 virtual kernel: scsi : aborting command due to timeout : pid 1707, scsi0, channel 0, id 0, lun 0 0x0a 02 eb 8e 24 00
Nov 28 01:30:44 virtual kernel: scsi : aborting command due to timeout : pid 1707, scsi0, channel 0, id 0, lun 0 0x0a 02 eb 8e 24 00
Nov 28 01:30:44 virtual kernel: SCSI host 0 abort() timed out - resetting
Nov 28 01:30:44 virtual kernel: Sent BUS DEVICE RESET to target 0
Nov 28 01:30:44 virtual kernel: Sending DID_RESET for target 0
Nov 28 01:30:44 virtual last message repeated 2 times
Nov 28 01:30:44 virtual kernel: aha1542_intr_handle: Unexpected interrupt
Nov 28 01:30:44 virtual kernel: tarstat=0, hastat=0 idlun=10 ccb#=1
Nov 28 01:30:44 virtual kernel: Sending DID_RESET for target 0
Nov 28 01:30:44 virtual kernel: aha1542_intr_handle: Unexpected interrupt
Nov 28 01:30:44 virtual kernel: tarstat=0, hastat=0 idlun=10 ccb#=2
Nov 28 01:30:44 virtual kernel: Sending DID_RESET for target 0
Nov 28 01:30:44 virtual kernel: aha1542_intr_handle: Unexpected interrupt
Nov 28 01:30:44 virtual kernel: tarstat=0, hastat=0 idlun=10 ccb#=3

It never happens with 1.2.13 kernel.
The hardware: Tekram dc800b scsi controller with 2Mb cache- it's supposed to be
AHA1542 compatible, Seagate ST31200N 1Gb SCSI.
I tried to compile 1.3.45 with old aha1542.{c,h} from 1.2.13 but it doesn't helps.
I badly need to get work recent kernel with my hardware because I want to use
ip-tunneling, which isn't implemented in 1.2.13 kernel.

        Any clues,

--  Oleg
_____________________________________________________________________________
Oleg Bartunov - researcher, hostmaster
Sternberg Astronomical Institute, Moscow University

-----------------------------------------------------------------------------

 
 
 

1. Exabyte & AHA1542 don't like Redhat & 1.2.13?

I have an exabyte scsi tape drive with an adaptec aha1542.  I'm trying
to use Redhat 2.1 with linux 1.2.13.  The tape drive shows up upon system
startup (the scsi card lists it as being detected).  Linux recongnizes the
scsi card also, but it never recongnizes the tape drive during bootup.  It
says "1 host found", but that host is just the scsi card itself.  If I do
tar -tf /dev/st0
i get Cannot ope n/dev/st0: No such device
I did mMAKEDEV st0 and all that... Any ideas what the problem could be?

Any  help would be greatly appreciated!
-Shoel Perelman

2. Linux, Win95 HP5L printer Question

3. Problems loading linux 1.2.13 with aha1542

4. The amazing disapearing CPU

5. strange problems 1.2.13 --> 2.0.0 --> 1.2.13

6. login into new installation rh7.3 on 60GB disk

7. Slackware 3.0 'ascsi' boot disk is 1.3.18 (I want 1.2.13)

8. mmap with MAP_FIXED

9. MReply 'Segmentation fault' on Linux 1.2.13

10. can't compile 1.2.13 anymore inconsistent operand constraints in an `asm'

11. MReply, 'Segmentation fault' on Linux 1.2.13

12. help: 'undefined reference' errors when recompiling 1.2.13

13. MReply 'Segmentation fault' on Linux 1.2.13