upgrading from v1.2.13 to v1.3.100, JDK, httpd

upgrading from v1.2.13 to v1.3.100, JDK, httpd

Post by Huw Roge » Thu, 06 Jun 1996 04:00:00



Here are all the packages and patches I needed to upgrade when moving
from 1.2.13 to 1.3.100. I wanted to get the Java JDK running on my
machine, hence the move. I also wanted a running NCSA httpd.

Do not expect 1.2.13 pcmcia, ppp, httpd or modules to work under 1.3.100
when you boot 1.3.100 the first time. You need to rebuild those pieces
and reboot a second time.

Hope this is useful,

        -Huw

--- configure, build, compile, install these in the listed order,
    then reboot for the 1st time into 1.3.100:

gcc 2.7.2 from ftp://sunsite.unc.edu/pub/Linux/GCC
libc 5.3.12 from ftp://sunsite.unc.edu/pub/Linux/GCC
ld.so.1.7.14 from ftp://sunsite.unc.edu/pub/Linux/GCC
binutils 2.6.0.14 from ftp://sunsite.unc.edu/pub/Linux/GCC
gdb 4.14 from ftp://sunsite.unc.edu/pub/Linux/GCC
linux 1.3.100 from ftp://sunsite.unc.edu/pub/Linux/kernel/v1.3

--- configure, build, install after rebooting:

modules 1.3.57 from ftp://sunsite.unc.edu/pub/Linux/kernel,
        with modules-1.3.57-patch from hhttp://www.pi.se/blox

procps-0.99a, with 1.3.91 patch applied,
        both from ftp://sunsite.unc.edu/pub/Linux/system/Status/ps
        may need to edit Makefile to build with BSD curses instead of ncurses;
        need to run the following perl one-liner on the diff to get a patch:
        perl -pi -e 's?build/procps-0.99a/??;'

termcap-2.0.8 from ftp://sunsite.unc.edu/pub/Linux/GCC,
        with references to obsolete type speed_t removed in termcap.[ch]

--- optional packages you may need to build, install after rebooting again:

pcmcia-cs 2.8.16 from ftp://hyper.stanford.edu/pub/pcmcia

ppp-2.2.0f from ftp://sunsite.unc.edu/pub/Linux/system/Network/serial/ppp,
        with the following perl one-liner run from the top directory in
        order to patch references to moved include files:
        perl -pi -e \
                's?net/ppp-comp.h?linux/ppp-comp.h?; \
                 s?net/if_ppp.h?linux/if_ppp.h?; \
                 s?net/ppp_defs.h?linux/ppp_defs.h?; \
                 s?net/pppio.h?linux/pppio.h?;' \
                `find . \( -name '*.c' -o -name '*.h' \) -print`


[ Huw Rogers     Senior Software Engineer, Fusion Systems Japan, Tokyo, Japan ]

--

[ Huw Rogers     Senior Software Engineer, Fusion Systems Japan, Tokyo, Japan ]

 
 
 

upgrading from v1.2.13 to v1.3.100, JDK, httpd

Post by Allen Wils » Sat, 08 Jun 1996 04:00:00


: Here are all the packages and patches I needed to upgrade when moving
: from 1.2.13 to 1.3.100. I wanted to get the Java JDK running on my
: machine, hence the move. I also wanted a running NCSA httpd.

: Do not expect 1.2.13 pcmcia, ppp, httpd or modules to work under 1.3.100
: when you boot 1.3.100 the first time. You need to rebuild those pieces
: and reboot a second time.

: Hope this is useful,

:       -Huw

: --- configure, build, compile, install these in the listed order,
:     then reboot for the 1st time into 1.3.100:

: gcc 2.7.2 from ftp://sunsite.unc.edu/pub/Linux/GCC
: libc 5.3.12 from ftp://sunsite.unc.edu/pub/Linux/GCC
: ld.so.1.7.14 from ftp://sunsite.unc.edu/pub/Linux/GCC
: binutils 2.6.0.14 from ftp://sunsite.unc.edu/pub/Linux/GCC
: gdb 4.14 from ftp://sunsite.unc.edu/pub/Linux/GCC
: linux 1.3.100 from ftp://sunsite.unc.edu/pub/Linux/kernel/v1.3

: --- configure, build, install after rebooting:

: modules 1.3.57 from ftp://sunsite.unc.edu/pub/Linux/kernel,
:       with modules-1.3.57-patch from hhttp://www.pi.se/blox

: procps-0.99a, with 1.3.91 patch applied,
:       both from ftp://sunsite.unc.edu/pub/Linux/system/Status/ps
:       may need to edit Makefile to build with BSD curses instead of ncurses;
:       need to run the following perl one-liner on the diff to get a patch:
:       perl -pi -e 's?build/procps-0.99a/??;'

: termcap-2.0.8 from ftp://sunsite.unc.edu/pub/Linux/GCC,
:       with references to obsolete type speed_t removed in termcap.[ch]

: --- optional packages you may need to build, install after rebooting again:

: pcmcia-cs 2.8.16 from ftp://hyper.stanford.edu/pub/pcmcia

: ppp-2.2.0f from ftp://sunsite.unc.edu/pub/Linux/system/Network/serial/ppp,
:       with the following perl one-liner run from the top directory in
:       order to patch references to moved include files:
:       perl -pi -e \
:               's?net/ppp-comp.h?linux/ppp-comp.h?; \
:                s?net/if_ppp.h?linux/if_ppp.h?; \
:                s?net/ppp_defs.h?linux/ppp_defs.h?; \
:                s?net/pppio.h?linux/pppio.h?;' \
:               `find . \( -name '*.c' -o -name '*.h' \) -print`


: [ Huw Rogers     Senior Software Engineer, Fusion Systems Japan, Tokyo, Japan ]

: --

: [ Huw Rogers     Senior Software Engineer, Fusion Systems Japan, Tokyo, Japan ]

You will also need make-3.74.gz

Allen

 
 
 

1. Inserting modules in v1.2.13

Hello,
        I am just getting my feet wet at kernel hacking and am
running into some problems. Hope to hear from some knowledgable
people here about them:

        My problem is that the 3Com Vortex cards are not supported
in the currently installed version. So, I got the driver and tried
to "insmod" it into 1.2.13, it gives me the following error:

kernel_version needed, but can't be found

        Now, I have the version.h file and the kernel-source in the
appropriate places and the version.h file DOES have the right version
#. Has anybody had similar problems?
        Thanks,
Sandeep
--
**************************************************************
Sandeep Singh                   272-8407/273-0101/255-7904
--------------------------------------------------------------
Mein kisi se khushiyan mangoon, yeh mujhe manzoor nahi;

2. POP3

3. v1.2.13 compile troubles

4. printing trouble, gs, epson..

5. SBpro and Linux v1.2.13

6. Denied to write in a file

7. M$-Rant(tm) v1.2.13 About Slirp.

8. HELP w/PPPD

9. Kernel V1.2.13 Compiled but getting Segmentation Failure Messages

10. Kernal v1.2.13/GCC v2.7.2 - Can't make zImage (io.h?)

11. IP aliasing on v1.2.13

12. Kernel Build Breaks at Final Link (v1.2.13 ELF)

13. Problem with GCC V2.7.2 compiling kernel V1.2.13