acenic problems on 2.5.47

acenic problems on 2.5.47

Post by Andrew Theure » Tue, 12 Nov 2002 22:30:10



I seem to be having a driver issue with acenic Gb adapters on 2.5.47.  Out of
four adapters, usually one, but sometimes two of the four adapters are
initialized upon 'insmod acenic':


                            http://home.cern.ch/~jes/gige/acenic.html
eth1: Alteon AceNIC Gigabit Ethernet at 0xfba00000, irq 3
  Tigon II (Rev. 6), Firmware: 12.4.11, MAC: 00:60:cf:21:2a:78
  PCI cache line size set incorrectly (64 bytes) by BIOS/FW, correcting to 128
  PCI bus width: 64 bits, speed: 66MHz, latency: 240 clks
  Disabling PCI memory write and invalidate
eth1: Firmware NOT running!
eth1: Alteon AceNIC Gigabit Ethernet at 0xfbb00000, irq 4
  Tigon II (Rev. 6), Firmware: 12.4.11, MAC: 00:60:cf:21:2a:7c
  PCI cache line size set incorrectly (64 bytes) by BIOS/FW, correcting to 128
  PCI bus width: 64 bits, speed: 66MHz, latency: 240 clks
  Disabling PCI memory write and invalidate
eth1: Firmware NOT running!
eth1: Alteon AceNIC Gigabit Ethernet at 0xfbc00000, irq 10
  Tigon II (Rev. 6), Firmware: 12.4.11, MAC: 00:60:cf:21:27:df
  PCI cache line size set incorrectly (64 bytes) by BIOS/FW, correcting to 128
  PCI bus width: 64 bits, speed: 66MHz, latency: 240 clks
  Disabling PCI memory write and invalidate
eth1: Firmware NOT running!
eth1: Alteon AceNIC Gigabit Ethernet at 0xfbc04000, irq 11
  Tigon II (Rev. 6), Firmware: 12.4.11, MAC: 00:60:cf:21:27:e5
  PCI cache line size set incorrectly (64 bytes) by BIOS/FW, correcting to 128
  PCI bus width: 64 bits, speed: 66MHz, latency: 240 clks
  Disabling PCI memory write and invalidate
eth1: Firmware up and running

It appears the first three cards do not get the firmware up and running, while
the fourth one does, and is assigned eth1.  I swear I have seen this before,
but can't remember what the problem was.  Anybody know?  Also, an oops on
rmmod:

Unable to handle kernel paging request at virtual address f8956140
f891b562
*pde = 00000000
Oops: 0000
CPU:    0
EIP:    0060:[<f891b562>]    Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010286
eax: f7c72000   ebx: 000003fc   ecx: 37d4a200   edx: f8956000
esi: f7c72160   edi: 00000100   ebp: f7c72000   esp: f6821f84
ds: 0068   es: 0068   ss: 0068
Stack: f891b000 fffffff0 f891b000 bfffe6fc c0116e53 f891b000 fffffff0 f6845000
       bfffe6fc c011639f f891b000 00000000 f6820000 0805fbf4 bfffe6dc c010874f
       bffff8f2 08067008 00000100 0805fbf4 bfffe6dc bfffe6fc 00000081 0000002b
Call Trace: [<c0116e53>]  [<c011639f>]  [<c010874f>]
Code: 8b 82 40 01 00 00 0d 00 00 01 00 89 82 40 01 00 00 83 7e 14

Quote:>>EIP; f891b562 <END_OF_CODE+384afc46/????>   <=====

Trace; c0116e52 <free_module+16/98>
Trace; c011639e <sys_delete_module+ea/1b0>
Trace; c010874e <syscall_call+6/a>
Code;  f891b562 <END_OF_CODE+384afc46/????>
00000000 <_EIP>:
Code;  f891b562 <END_OF_CODE+384afc46/????>   <=====
   0:   8b 82 40 01 00 00         mov    0x140(%edx),%eax   <=====
Code;  f891b568 <END_OF_CODE+384afc4c/????>
   6:   0d 00 00 01 00            or     $0x10000,%eax
Code;  f891b56c <END_OF_CODE+384afc50/????>
   b:   89 82 40 01 00 00         mov    %eax,0x140(%edx)
Code;  f891b572 <END_OF_CODE+384afc56/????>
  11:   83 7e 14 00               cmpl   $0x0,0x14(%esi)

Thanks,

Andrew Theurer
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

acenic problems on 2.5.47

Post by Jes Sorense » Tue, 12 Nov 2002 22:30:16


Andrew> I seem to be having a driver issue with acenic Gb adapters on
Andrew> 2.5.47.  Out of four adapters, usually one, but sometimes two
Andrew> of the four adapters are initialized upon 'insmod acenic':

Hmmm what kinda box is this on? The old problem was related to
hardware doing posted writes (like ia64 and PPC64 boxes), however I
believe the changes for that went into the main tree.

Cheers,
Jes

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

1. 2.5.47 compilation problem

With CONFIG_IP_NF_TARGET_TCPMSS=m:

  gcc -Wp,-MD,net/ipv4/netfilter/.ipt_TCPMSS.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i586 -Iarch/i386/mach-generic -nostdinc -iwithprefix include -DMODULE   -DKBUILD_BASENAME=ipt_TCPMSS   -c -o net/ipv4/netfilter/ipt_TCPMSS.o net/ipv4/netfilter/ipt_TCPMSS.c
net/ipv4/netfilter/ipt_TCPMSS.c: In function `ipt_tcpmss_target':
net/ipv4/netfilter/ipt_TCPMSS.c:95: structure has no member named `pmtu'
make[3]: *** [net/ipv4/netfilter/ipt_TCPMSS.o] Error 1
make[2]: *** [net/ipv4/netfilter] Error 2
make[1]: *** [net/ipv4] Error 2
make: *** [net] Error 2

ian
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

2. ip masq & client services

3. 2.5.47-mm2 testing, module problems

4. NS 4.5 behavior

5. 2.5.47 scheduler problems?

6. Setting Telnet to run in Inittab?

7. Install a Printer

8. 2.5.47-xfs loop device problem

9. APIC problem on 2.5.47 SMP noapic

10. Build FAILED! 2.5.47 & 2.5.47-bk2

11. 2.5.47-ac5:undefined reference to `boot_gdt_table'

12. PNP driver changes for 2.5.47