airo.o + kfree_skb crash - 2.4.20

1. IBM x440 problems on 2.4.20 to 2.4.20-rc1-ac3

Helo,
I'm trying to boot from linux kernel 2.4 tree
i've installed rh 7.1 dist, but system seems only 3 procesors, so i made
2.4.20 kernel with smp without NUMA support and i saw 4 processors. Next
2.4.20 with numa support, and system hangs on mounting root filesystem (no
scsi devices found, ide devices lost interruption, no keyboard found etc
etc)
Next 2.4.21-rc1-ac3 without NUMA, 3-processors available
with NUMA support and summit/exa support and clustered apic support kernel
boots, found scsi devices but hangs on it with lost interruption, also with
ide devices and so on
machine has 4 HT processors and 8GB of RAM
any ideas or help?

i don't wat to use 2.5.x kernel.....

regards

Sobczak Wojciech

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

2. Mounting SCSI CD-ROM

3. 2.4.20 + XFS patches + rmap15a + Ingo's 2.4.20-rc3 O(1) sched

4. Network Misery

5. NFS/UDP/IP performance - 2.4.19 v/s 2.4.20, 2.4.20-pre3

6. Windows and linux!

7. SCSI under 2.4.20-8 but not 2.4.20-18.9 (RH9)

8. igmp kernel issues.

9. IDE DMA timeout, then crash on reenable (2.4.20-SMP)

10. 2.4.20-pre2-ac4 crash when mounting cdrw-device (ide-scsi)

11. Kernel 2.4.20 crashes on Nehemiah with C3 optimization

12. 2.4.20 kernel crashes while scanning partition list

13. 2.4.20 IDE-SCSI / CD-writing crash