kernel 2.4.0/1/1-ac15 and ncr53c810a

kernel 2.4.0/1/1-ac15 and ncr53c810a

Post by Wolfgang Teichma » Sun, 18 Feb 2001 10:06:05



Hello,

I have problems using my scanner (HP C6270A connected to ncr53c810a)
with xsane.

I always get the error message:

error during read: Error during device I/O

Feb 15 23:57:27 localhost kernel: Attached scsi generic sg2 at scsi0,
channel 0, id 4, lun 0, type 3
Feb 15 23:57:27 localhost kernel: ncr53c810a-0-<4,*>: target did not
report SYNC.
Feb 15 23:58:01 localhost kernel: scsi : aborting command due to timeout
: pid 0, scsi0, channel 0, id 4, lun 0 Read (6) 00 00 7b 66 00
Feb 15 23:58:01 localhost kernel: ncr53c8xx_abort: pid=0
serial_number=1099 serial_number_at_timeout=1099
Feb 15 23:58:04 localhost kernel: SCSI host 0 abort (pid 0) timed out -
resetting
Feb 15 23:58:04 localhost kernel: SCSI bus is being reset for host 0
channel 0.
Feb 15 23:58:04 localhost kernel: ncr53c8xx_reset: pid=0 reset_flags=2
serial_number=1099 serial_number_at_timeout=1099
Feb 15 23:58:04 localhost kernel: ncr53c810a-0: restart (scsi reset).

With kernel 2.2.x I have no problems accessing the scanner with xsane.

Any idea?

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

kernel 2.4.0/1/1-ac15 and ncr53c810a

Post by J . A . Magallo » Sun, 18 Feb 2001 10:24:36



Quote:> Hello,

> I have problems using my scanner (HP C6270A connected to ncr53c810a)
> with xsane.

> I always get the error message:

> error during read: Error during device I/O

> Feb 15 23:57:27 localhost kernel: Attached scsi generic sg2 at scsi0,
> channel 0, id 4, lun 0, type 3

Try disabling 'Initiate sync negotitation' in the card BIOS for the ID of
the scanner.

--
J.A. Magallon                                                      $> cd pub

Linux werewolf 2.4.1-ac14 #1 SMP Thu Feb 15 16:05:52 CET 2001 i686

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

kernel 2.4.0/1/1-ac15 and ncr53c810a

Post by Mr. James W. Laferrier » Sun, 18 Feb 2001 10:46:30


        Hello Wolfgang & J.A. ,



> > Hello,
> > I have problems using my scanner (HP C6270A connected to ncr53c810a)
> > with xsane.
> > I always get the error message:
> > error during read: Error during device I/O
> > Feb 15 23:57:27 localhost kernel: Attached scsi generic sg2 at scsi0,
> > channel 0, id 4, lun 0, type 3
> Try disabling 'Initiate sync negotitation' in the card BIOS for the ID of
> the scanner.

        There is no Bios on an 810/810a .  There is a way to tell the
        driver not to 'initiate Sync' & I'd prolly recommend disabling
        'disconnect' as well .  UNLESSS you have -any- other device on
        the 810's scsi bus .  Please see :
        linux/drivers/scsi/EADME.ncr53c8xx
                Hth ,  JimL
       +----------------------------------------------------------------+
       | James   W.   Laferriere | System  Techniques | Give me VMS     |
       | Network        Engineer | 25416      22nd So |  Give me Linux  |

       +----------------------------------------------------------------+

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

1. kernel 2.4.0/1/1-ac13 and ncr53c810a

Hello,

I have problems using my scanner (HP C6270A connected to ncr53c810a)
with xsane.

I always get the error message:

error during read: Error during device I/O

Feb 15 23:57:27 localhost kernel: Attached scsi generic sg2 at scsi0,
channel 0, id 4, lun 0, type 3
Feb 15 23:57:27 localhost kernel: ncr53c810a-0-<4,*>: target did not
report SYNC.
Feb 15 23:58:01 localhost kernel: scsi : aborting command due to timeout
: pid 0, scsi0, channel 0, id 4, lun 0 Read (6) 00 00 7b 66 00
Feb 15 23:58:01 localhost kernel: ncr53c8xx_abort: pid=0
serial_number=1099 serial_number_at_timeout=1099
Feb 15 23:58:04 localhost kernel: SCSI host 0 abort (pid 0) timed out -
resetting
Feb 15 23:58:04 localhost kernel: SCSI bus is being reset for host 0
channel 0.
Feb 15 23:58:04 localhost kernel: ncr53c8xx_reset: pid=0 reset_flags=2
serial_number=1099 serial_number_at_timeout=1099
Feb 15 23:58:04 localhost kernel: ncr53c810a-0: restart (scsi reset).

With kernel 2.2.x I have no problems accessing the scanner with xsane.

Any idea?

2. linuxppc v4 bug

3. Matrox Mystique ands X.

4. DUAL SLIP - ETHERNET PROBLEMS!!!

5. NCR53C810a, Linux and Sony 926S Cdrom burner

6. Problem with SoundBlaster 16 after upgrade

7. Two NCR53c810a controllers

8. autobackup mail server

9. Performance problem ncr53c810a and SCSI Zip

10. SCSI: CD-ROM Traxdata-CDR4120 and ncr53c810a

11. problem w/xcdroast, ncr53c810a

12. ncr53c810a and CD-ROM Traxdata-CDR4120

13. (2.4.1-ac15) Wont set using_dma = 1 with hdparm