interop success, ip6sec Linux 2.5.65 vs FreeBSD 4.7-STABLE

interop success, ip6sec Linux 2.5.65 vs FreeBSD 4.7-STABLE

Post by bert huber » Wed, 19 Mar 2003 18:20:09



Thanks to Niels Bakker I can report that stock Linux 2.5.65 can talk IP6SEC
with FreeBSD 4.7-STABLE (KAME 20010528/FreeBSD). It worked on the first try.

This using ipsec-tools-0.2.2 and manual keying. Racoon is reported not to
listen on IPv6 sockets yet, but we didn't try this.

The configuration used is that described in
http://lartc.org/howto/lartc.ipsec.html 'Intro with Manual Keying', with
IPv4 addresses replaced by IPv6 addresses.

Thanks for making this possible!

Regards,

Bert

--
http://www.PowerDNS.com      Open source, database driven DNS Software
http://lartc.org           Linux Advanced Routing & Traffic Control HOWTO
http://netherlabs.nl                         Consulting
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

1. ide kernel panic: 2.5.64-ac3 2.5.65-ac1 2.5.65-mm4

AMD K6/2 with VIA chipset has this panic at boot:

Kernel panic: ide: default attach failed

Panic on 2.5.64-ac3, 2.5.65-ac[13], 2.5.65-mm4, 2.5.65-bk4.

No panic on 2.5.61-ac1, 2.5.65-mm3, 2.5.65, 2.4.21-pre5, 2.4.21-pre5-ac3.

No modules.

egrep '^C.*IDE|^C.*VIA' /usr/src/linux-2.5.65-ac1/.config
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDE_MODES=y

Boot message on 2.5.65-ac1:

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci00:07.1
    ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 51536U3, ATA DISK drive
hdb: ATAPI CDROM, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: Maxtor 52049U4, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 30015216 sectors (15368 MB) w/2048KiB Cache, CHS=29777/16/63, UDMA(33)
 hda: [PTBL] [1868/255/63] hda1 hda2 hda3
hdc: host protected area => 1
hdc: 40020624 sectors (20491 MB) w/2048KiB Cache, CHS=39703/16/63, UDMA(33)
 hdc: hdc1 hdc2 hdc3
ide-disk: hdc: Failed to register the driver with ide.c
ide-default: hdc: Failed to register the driver with ide.c
Kernel panic: ide: default attach failed

lspci -vvv for IDE interface

IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at e000 [size=16]

lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 04)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 47)
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00:07.3 Host bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10)
00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev 10)
01:00.0 VGA compatible controller: nVidia Corporation NV6 [Vanta] (rev 15)

--
Randy Hron
http://home.earthlink.net/~rwhron/kernel/bigbox.html

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

2. Velleman K8000

3. [2.5.65] kexec for 2.5.65 available

4. Windows 2000 as POS

5. Linux 2.5.65-ac2

6. Running SLIP & CSLIP on the same box?

7. Linux 2.5.65-ac3

8. Newest Slakeware Kernel

9. Linux 2.5.65

10. Some Warning from gcc-3.4-cvs for 2.5.65

11. 2.5.65: 3C905 driver doesn't work.

12. fix pppoatm compile in 2.5.65

13. 2.5.65 RCU oops.