> > > >> last month and it keeps coming up with IRQ0 and telling me it cant
> > > >> find a irq for pin A. what would be causing this and how do I
> > > >> correct it i have already tried APCI and it does not work on my
> > > >> laptop so that is no help. I have compiled SMP into the kernel
> > > >> though I dont have a dual processor (of course) to gain the added
> > > >> functionality. I have recompiled my kernel about 150 times with
> > > >> different setting hoping it might just be a conflict in the kernel
> > > >> with no luck. I looked at the yenta driver it's self and noticed
> > > >> that it accepts IRQ0 as a valid irq but that appears to mean no irq
> > > >> at all. which config file would i use to force it to set a irq?
> > > >> > Thanx for any assistanc you might give
> > > >> plz send an lspci -vv -xxx -s *your dev*
> > > >> what kernel are you using ?
> > > > i am using 2.4.18 and here is lspci
> > > uhmm, 1th try to upgrade to a newer one, then I experienced the same
> > > problem with a custom board... the problem was triggered by the Base
> > > Address too high:
> > > Region 0: Memory at 10812000 (32-bit, non-prefetchable) [size=4K]
> > > moving id_sel (in the PCI core of the board) in order to obtain a lower
> > > bar all worked.
> > > BTW, has anybody there ever heared about such a costraint in the PCI
> > > specification ?? Why I got this strange behaviour ???
> > ok, can you give me some more specifics? i.e how do i do that or what
> > howto/man etc. (not the kernel part the id_sel part) thanx
> I think you can't do that if you are not able to put your hand in the HW.
> There's nothing you can do from linux, that I know...
> You can take a look to the PCI specification, but i don't think it will aid
> you so much...
when I reformated my drive for linux i lost the ibm configuration utilities
for windows and havent been able to get them back any other suggestions or
how do i get to the bios froma floppy with a thinkpad 760ed.
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/