et/lt epoll for 2.4.20 ...

et/lt epoll for 2.4.20 ...

Post by Davide Libenz » Wed, 26 Mar 2003 01:50:10



Here's the patch :

http://www.xmailserver.org/linux-patches/epoll-lt-2.4.20-0.3.diff

- Davide

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

1. IBM x440 problems on 2.4.20 to 2.4.20-rc1-ac3

Helo,
I'm trying to boot from linux kernel 2.4 tree
i've installed rh 7.1 dist, but system seems only 3 procesors, so i made
2.4.20 kernel with smp without NUMA support and i saw 4 processors. Next
2.4.20 with numa support, and system hangs on mounting root filesystem (no
scsi devices found, ide devices lost interruption, no keyboard found etc
etc)
Next 2.4.21-rc1-ac3 without NUMA, 3-processors available
with NUMA support and summit/exa support and clustered apic support kernel
boots, found scsi devices but hangs on it with lost interruption, also with
ide devices and so on
machine has 4 HT processors and 8GB of RAM
any ideas or help?

i don't wat to use 2.5.x kernel.....

regards

Sobczak Wojciech

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

2. Concerns about RH 9, comments invited

3. 2.4.20 + XFS patches + rmap15a + Ingo's 2.4.20-rc3 O(1) sched

4. ipchains vs. sysctl set kernel parameters

5. NFS/UDP/IP performance - 2.4.19 v/s 2.4.20, 2.4.20-pre3

6. Help - Adaptec 2920 drivers.

7. SCSI under 2.4.20-8 but not 2.4.20-18.9 (RH9)

8. No route to localhost

9. sbp2.o fails to load on RH rpms - 2.4.20-2.9, 2.4.20-2.10 and 2.4.20-2.11

10. mm/slab.c, kernel <2.4.20>

11. epoll with per-fd selectable LT/ET behaviour ...

12. epoll with a per-fd selectable LT/ET behaviour ...

13. lt-epoll ( level triggered epoll ) ...