AGP aperture is 16MB @ 0x0

AGP aperture is 16MB @ 0x0

Post by Gianni Tedesc » Mon, 03 Feb 2003 16:40:09



Hi,

I have a problem getting agpgart/drm to work on my TiBook, I have
tracked the problem down to that suspect looking message.



which results in the following messages in my XFree86 logs:

[agp] ring handle = 0x0000000
[agp] Could not map ring

Its an ATI Radeon 7500 Mobility M7 on an Apple UniNorth 1.5 chipset.

I think the correct aperture base is one of:

AGP special page: 0xdffff000
aper_base: b8000000 MC_FB_LOC to: bbffb800, MC_AGP_LOC to: ffffc000

--
// Gianni Tedesco (gianni at scaramanga dot co dot uk)
lynx --source www.scaramanga.co.uk/gianni-at-ecsc.asc | gpg --import
8646BE7D: 6D9F 2287 870E A2C9 8F60 3A3C 91B5 7669 8646 BE7D

  signature.asc
< 1K Download
 
 
 

AGP aperture is 16MB @ 0x0

Post by Benjamin Herrenschmid » Mon, 03 Feb 2003 21:30:10



> Hi,

> I have a problem getting agpgart/drm to work on my TiBook, I have
> tracked the problem down to that suspect looking message.



> which results in the following messages in my XFree86 logs:

> [agp] ring handle = 0x0000000
> [agp] Could not map ring

Ok, things are a bit weird with UniNorth, AGP base beeing at 0
is actually correct. You probably need fixed DRM which can deal

for up to date patches against XFree DRI CVS

Quote:> Its an ATI Radeon 7500 Mobility M7 on an Apple UniNorth 1.5 chipset.

> I think the correct aperture base is one of:

> AGP special page: 0xdffff000
> aper_base: b8000000 MC_FB_LOC to: bbffb800, MC_AGP_LOC to: ffffc000

No. These are addresses in the card's address space, and things are
setup differently than what is displayed by this debug code actually ;)
What you see there is what I would like to program in the card, but I
had to disable this for now as it's incompatible with current XFree
radeon driver.

--

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

1. agp problem: cannot write combine agp aperture

I have an MSI 8831 video card (geforce 2) and a FIC AD11 mom board (AMD
761). I'm running Slackware 8.0 (XFree86 4.1.0) with a 2.4.12 kernel
that I compiled (mtrr support is compiled in). I'm using the nvidia
1.0-1541 driver.

When agpgart isn't compiled in, after I startx "dmesg | grep NVRM" yields:
        NVRM: loading NVIDIA kernel module version 1.0-1541
        NVRM: *** Cannot WriteCombine the AGP Aperture

"cat /proc/nv/card0" yields:
        ----- Driver Info -----
        NVRM Version: 1.0-1541
        ------ Card Info ------
        Model:        GeForce2 GTS
        IRQ:          10
        Video BIOS:   03.15.01.00
        ------ AGP Info -------
        AGP status:   Disabled
        AGP Driver:
        Bridge:       Generic AMD
        SBA:          Supported [disabled]
        FW:           Supported [disabled]
        Rates:        4x 2x 1x  [-]
        Registers:    0x0f000217:0x00000000

When agpgart is compiled in, after I startx, "dmesg | grep agpgart" yields:
        Linux agpgart interface v0.99 (c) Jeff Hartmann
        agpgart: Maximum main memory to use for agp memory: 203M
        agpgart: Detected AMD 761 chipset

and "dmesg | grep NVRM" yields:
        NVRM: loading NVIDIA kernel module version 1.0-1541
        NVRM: AGPGART: unknown chipset
        NVRM: AGPGART: unable to set MTRR write-combining

        NVRM: AGPGART: aperture mapped from 0xd0000000 to 0xd598f000
        NVRM: AGPGART: mode 4x
        NVRM: AGPGART: allocated 16 pages

and /proc/nv/card0 says:
        ...
        ------ AGP Info -------
        AGP status:   Enabled
        AGP Driver:   AGPGART
        Bridge:       Generic AMD
        SBA:          Supported [disabled]
        FW:           Supported [disabled]
        Rates:        4x 2x 1x  [4x]
        Registers:    0x0f000217:0x00000104

Does anyone have any ideas? Is this just a configuration problem? Am I
having a hardware problem?

Much thanks,
Jason

2. Gravis MAX CD Rom control

3. nvidia agp problem: cannot writecombine agp aperture

4. can't find clone()

5. AGP aperture size for voodoo3/2000?

6. Solaris2.2: Printing problem !

7. Hardware problems: Mandrake 7.0 tulip: eth0: MMIO Region (0X0@0X0) Unavailable, aborting

8. Slow Printing

9. 512M memory and AGP aperture size

10. nVidia 16MB AGP video card Driver?

11. Which X Server for a Creative Banshee 16mb AGP ??

12. Xentor AGP 16Mb Graphic Card

13. 3DFX voodoo AGP 16mb with redhat 5.2 help