by -----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I report execution of scripts/ver_linux of the kernel source directory:
(root@linux:/usr/src/linux/scripts >sh ver_linux)
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux linux 2.4.18-ac3 #1 Sat Mar 9 19:27:26 CET 2002 i686 unknown
Gnu C 2.95.2
Gnu make 3.79.1
binutils 2.10.0.33
util-linux 2.11n
mount 2.11n
modutils 2.4.14
e2fsprogs 1.27-WIP
pcmcia-cs 3.1.22
PPP 2.4.1b2
Linux C Library x 1 root root 1382179 dic 18 16:32
/lib/libc.so.6
Dynamic linker (ldd) 2.2
Procps 2.0.7
Net-tools 1.57
Kbd 1.02
Sh-utils 2.0
Modules Loaded snd-pcm-oss snd-pcm-plugin snd-mixer-oss ipv6
snd-seq-midi snd-seq-midi-event snd-seq snd-card-emu10k1 snd-emu10k1
snd-emux-mem snd-pcm snd-timer snd-rawmidi snd-ac97-codec snd-mixer
snd-seq-device snd soundcore mousedev hid input usb-ohci ipt_limit ipt_state
iptable_mangle iptable_nat ip_conntrack iptable_filter ip_tables usbcore
aic7xxx_old
(Well, there's an error because I used gcc 2.95.3: I compiled it form sources
with gcc-2.95.2).
The problem is with CMOS clock.
I have this problem: the kernel doesn't match the right clock time. I have to
set my CMOS clock with 2 hours first to view the right clock with: 'date',
but if I use date -u it response exactly. How ever when I shutdown machine
and I get power on after a bit, for example 15 minutes, I view the clock is
10 minutes back. A time I shuted-down machine I get power on and the clock
was very mistakes. About 12 hours back.
********** less /proc/version gives:
Linux version 2.4.18-ac3 (root@linux) (gcc version 2.95.3 20010315 (release))
#1
********** less /proc/cpuinfo gives:
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 4
model name : AMD Athlon(tm) Processor
stepping : 4
cpu MHz : 1410.312
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov
bogomips : 2811.49
********** less /proc/modules gives:
snd-pcm-oss 18540 1 (autoclean)
snd-pcm-plugin 14864 0 (autoclean) [snd-pcm-oss]
snd-mixer-oss 4924 1 (autoclean) [snd-pcm-oss]
ipv6 126100 -1 (autoclean)
snd-seq-midi 3136 0 (unused)
snd-seq-midi-event 3040 0 [snd-seq-midi]
snd-seq 41488 0 [snd-seq-midi snd-seq-midi-event]
snd-card-emu10k1 2208 2
snd-emu10k1 21216 0 [snd-card-emu10k1]
snd-emux-mem 1216 0 [snd-emu10k1]
snd-pcm 30720 0 [snd-pcm-oss snd-pcm-plugin snd-emu10k1]
snd-timer 8980 0 [snd-seq snd-pcm]
snd-rawmidi 10208 0 [snd-seq-midi snd-emu10k1]
snd-ac97-codec 23528 0 [snd-emu10k1]
snd-mixer 27524 0 [snd-mixer-oss snd-emu10k1 snd-ac97-codec]
snd-seq-device 3788 0 [snd-seq-midi snd-seq snd-card-emu10k1
snd-rawmidi]
snd 33056 1 [snd-pcm-oss snd-pcm-plugin snd-mixer-oss
snd-seq-midi snd-seq-midi-event snd-seq snd-card-emu10k1 snd-emu10k1
snd-emux-mem snd-pcm snd-timer snd-rawmidi snd-ac97-codec snd-mixer
snd-seq-device]
soundcore 3588 5 [snd]
mousedev 3864 0 (unused)
hid 12904 0 (unused)
input 3392 0 [mousedev hid]
usb-ohci 17896 0 (unused)
ipt_limit 952 1 (autoclean)
ipt_state 600 2 (autoclean)
iptable_mangle 2132 0 (autoclean) (unused)
iptable_nat 12952 0 (autoclean) (unused)
ip_conntrack 13240 2 (autoclean) [ipt_state iptable_nat]
iptable_filter 1704 1 (autoclean)
ip_tables 10616 7 [ipt_limit ipt_state iptable_mangle
iptable_nat iptable_filter]
usbcore 48896 1 [hid usb-ohci]
aic7xxx_old 109632 0 (unused)
********** less /proc/ioports gives:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
a000-a0ff : Adaptec AHA-7850
a000-a0fe : aic7xxx
a400-a407 : Creative Labs SB Live!
a800-a81f : Creative Labs SB Live! EMU10k1
a800-a81f : EMU10K1
b400-b40f : Acer Laboratories Inc. [ALi] M5229 IDE
b400-b407 : ide0
b408-b40f : ide1
d000-dfff : PCI Bus #01
d800-d8ff : ATI Technologies Inc Radeon VE QY
e400-e43f : Acer Laboratories Inc. [ALi] M7101 PMU
e800-e81f : Acer Laboratories Inc. [ALi] M7101 PMU
********** less /proc/iomem gives:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0ffebfff : System RAM
00100000-0025fbf0 : Kernel code
0025fbf1-002cc93f : Kernel data
0ffec000-0ffeefff : ACPI Tables
0ffef000-0fffefff : reserved
0ffff000-0fffffff : ACPI Non-volatile Storage
e4800000-e4800fff : Adaptec AHA-7850
e5800000-e5800fff : Acer Laboratories Inc. [ALi] M5237 USB (#2)
e5800000-e5800fff : usb-ohci
e6800000-e6800fff : Acer Laboratories Inc. [ALi] M5237 USB
e6800000-e6800fff : usb-ohci
e7000000-e7efffff : PCI Bus #01
e7000000-e700ffff : ATI Technologies Inc Radeon VE QY
e7000000-e700ffff : radeonfb
e7f00000-efffffff : PCI Bus #01
e8000000-efffffff : ATI Technologies Inc Radeon VE QY
e8000000-efffffff : radeonfb
f0000000-f7ffffff : PCI device 10b9:1647 (Acer Laboratories Inc. [ALi])
ffff0000-ffffffff : reserved
********** llspci -vvv (as root) gives:
00:00.0 Host bridge: Acer Laboratories Inc. [ALi]: Unknown device 1647 (rev
04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR+
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [b0] AGP version 2.0
Status: RQ=27 SBA+ 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x1
Capabilities: [a4] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: Acer Laboratories Inc. [ALi] M5247 (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e7000000-e7efffff
Prefetchable memory behind bridge: e7f00000-efffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:02.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03)
(prog-if 10 [OHCI])
Subsystem: Acer Laboratories Inc. [ALi] M5237 USB
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: Memory at e6800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c4)
(prog-if fa)
Subsystem: Asustek Computer, Inc.: Unknown device 8053
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at b400 [size=16]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:06.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03)
(prog-if 10 [OHCI])
Subsystem: Acer Laboratories Inc. [ALi] M5237 USB
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), cache line size 08
Interrupt: pin A routed to IRQ 5
Region 0: Memory at e5800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge
[Aladdin IV]
Subsystem: Acer Laboratories Inc. [ALi] ALI M1533 Aladdin IV ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [a0] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 07)
Subsystem: Creative Labs: Unknown device 8061
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at a800 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.1 Input device controller: Creative Labs SB Live! (rev 07)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at a400 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)
Subsystem: Adaptec AHA-2904/Integrated AIC-7850
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at e4800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 Bridge: Acer Laboratories Inc. [ALi] M7101 PMU
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5159
(prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 013a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at d800 [size=256]
Region 2: Memory at e7000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at e7fe0000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=47 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=27 SBA+ AGP+ 64bit- FW- Rate=x1
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
********** less /proc/scsi/scsi gives:
Attached devices: none
********** less /proc/interrupts gives:
CPU0
0: 194878 XT-PIC timer
1: 4571 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 0 XT-PIC usb-ohci
9: 0 XT-PIC usb-ohci
10: 28029 XT-PIC EMU10K1
11: 14 XT-PIC aic7xxx
12: 71541 XT-PIC PS/2 Mouse
14: 64626 XT-PIC ide0
15: 2 XT-PIC ide1
NMI: 0
LOC: 194848
ERR: 540
MIS: 0
My system is : ASUS A7A266, Athlon 1,4 GHz, 256 MByte DDR SDRAM, PCI Sound
CARD Sound Blaster Live Player 5.1, Graphic CARD: ATI RADEON VE 32 MByte DDR.
Can you reply and tell me if is the wrong time on my SuSE Linux 7.1 is a
kernel bug or if it's something else? I thank you for all your work and I
tell everyone develops Linux kernel: "go on".
Gianni, a Linux User
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE82tYAnT2ev4/bQKARAla2AJ9O7+e9EX5mPLqt2VwaAB9fNYQPZQCeNicA
FD188iIf759GA8NCGe2tfTo=
=a4Ao
-----END PGP SIGNATURE-----
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/