Very Computer

Ok, here is the output (the status are displayed only if the interface
is down, so I had to go execute this manually on the machines) :

 http://www.scyld.com/diag/index.html
Index #1: Found a Intel i82557 (or i82558) EtherExpressPro100B adapter at 0xef00.
i82557 chip registers at 0xef00:
  00000000 00000000 00000000 00080002 182541e1 00000600
  No interrupt sources are pending.
   The transmit unit state is 'Idle'.
   The receive unit state is 'Idle'.
  This status is unusual for an activated interface.
Index #2: Found a Intel i82557 (or i82558) EtherExpressPro100B adapter at 0xee80.
i82557 chip registers at 0xee80:
  00000000 00000000 00000000 00080002 183f0000 00000000
  No interrupt sources are pending.
   The transmit unit state is 'Idle'.
   The receive unit state is 'Idle'.
  This status is unusual for an activated interface.

 http://www.scyld.com/diag/index.html
Index #1: Found a Intel i82557 (or i82558) EtherExpressPro100B adapter at 0xef00.
i82557 chip registers at 0xef00:
  00000000 00000000 00000000 00080002 182541e1 00000600
  No interrupt sources are pending.
   The transmit unit state is 'Idle'.
   The receive unit state is 'Idle'.
  This status is unusual for an activated interface.
Index #2: Found a Intel i82557 (or i82558) EtherExpressPro100B adapter at 0xee80.
i82557 chip registers at 0xee80:
  00000000 00000000 00000000 00080002 183f0000 00000000
  No interrupt sources are pending.
   The transmit unit state is 'Idle'.
   The receive unit state is 'Idle'.
  This status is unusual for an activated interface.

 http://www.scyld.com/diag/index.html
Index #1: Found a Intel i82557 (or i82558) EtherExpressPro100B adapter at 0xef00.
Intel EtherExpress Pro 10/100 EEPROM contents:
  Station address 00:D0:B7:00:BE:00.
  Board assembly 000000-000, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
Index #2: Found a Intel i82557 (or i82558) EtherExpressPro100B adapter at 0xee80.
Intel EtherExpress Pro 10/100 EEPROM contents:
  Station address 00:D0:B7:00:BE:01.
  Board assembly 000000-000, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.

 http://www.scyld.com/diag/index.html
Index #1: Found a Intel i82557 (or i82558) EtherExpressPro100B adapter at 0xef00.
EEPROM contents, size 64x16:
    00: d000 00b7 00be 0c03 0003 0201 4701 0000
  0x08: 0000 0000 40a2 3000 8086 0000 0000 0000
      ...
  0x38: 0000 0000 0000 0000 0000 0000 0000 a315
 The EEPROM checksum is correct.
Intel EtherExpress Pro 10/100 EEPROM contents:
  Station address 00:D0:B7:00:BE:00.
  Board assembly 000000-000, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
Index #2: Found a Intel i82557 (or i82558) EtherExpressPro100B adapter at 0xee80.
EEPROM contents, size 64x16:
    00: d000 00b7 01be 0c03 0003 0201 4701 0000
  0x08: 0000 0000 40a2 3000 8086 0000 0000 0000
      ...
  0x38: 0000 0000 0000 0000 0000 0000 0000 a215
 The EEPROM checksum is correct.
Intel EtherExpress Pro 10/100 EEPROM contents:
  Station address 00:D0:B7:00:BE:01.
  Board assembly 000000-000, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.

 http://www.scyld.com/diag/index.html
Index #1: Found a Intel i82557 (or i82558) EtherExpressPro100B adapter at 0xef00.
 MII PHY #1 transceiver registers:
  3000 782d 02a8 0154 05e1 41e1 0003 0000
  0000 0000 0000 0000 0000 0000 0000 0000
  0203 0000 0001 ffff 0000 0001 ffff 0001
  0004 0000 0000 0000 0000 0000 0000 0000.
Index #2: Found a Intel i82557 (or i82558) EtherExpressPro100B adapter at 0xee80.
 MII PHY #1 transceiver registers:
  3000 7809 02a8 0154 05e1 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000
  0000 0000 0001 0000 0000 0000 0000 0000
  0000 0000 0000 0000 0000 0000 0000 0000.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[snip]

What about lspci?

        Andrey
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Ah, yes, here it is :

00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (AGP disabled) (rev 03)
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
00:0c.0 Ethernet controller: Intel Corporation 82557 (rev 08)
00:0d.0 Ethernet controller: Intel Corporation 82557 (rev 08)
00:0e.0 VGA compatible controller: ATI Technologies Inc 215GP [Mach64 GP] (rev 5c)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

It's i82559.
It can't have that original bug which is checked by those EEPROM bits and
workaround for which is implemented.
You probably have another one :-)

What are the symptomes of the lock-ups?
Does TX timeout happen?
Does the card recover and resume operations after that?

Best regards
                Andrey
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/