new 2.5.72 breaks aumix

new 2.5.72 breaks aumix

Post by Gerardo Arnae » Mon, 23 Jun 2003 02:50:08



[1.] kernel 2.5.72 breaks aumix
[2.]I have been using 2.5.69-ac1 on a HP pavilion
ze5285us laptop. i
maintain a how-to on installing debian on it. I have
upgraded to the
2.5.72 kernel. Now aumix will not longer work
[3.] aumix kernel sound
[4.]Linux version 2.5.72 (root@brick) (gcc version
2.95.4 20011002
(Debian prerelease)) #1 Sat Jun 21 16:41:33 PDT 2003
[5.]N/A
[6.]
dude@brick:~$ aumix
aumix:  error opening mixer
[7.]
[7.1]
Linux brick 2.5.72 #1 Sat Jun 21 16:41:33 PDT 2003
i686 unknown

 Gnu C                  2.95.4
 Gnu make               3.79.1
 util-linux             2.11n
 mount                  2.11n
 module-init-tools      2.4.15
 e2fsprogs              1.27
 pcmcia-cs              3.1.33
 Linux C Library        2.3.1
 Dynamic linker (ldd)   2.3.1
 Procps                 2.0.7
 Net-tools              1.60
 Console-tools          0.2.3
 Sh-utils               2.0.11
 Modules Loaded        

[7.2]
brick:/usr/src/linux/scripts# cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Pentium(R) 4 CPU 2.66GHz
stepping        : 7
cpu MHz         : 2659.333
cache size      : 512 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8
sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss
ht tm pbe cid
bogomips        : 5210.11
[7.3]
brick:/usr/src/linux/scripts# cat /proc/modules
brick:/usr/src/linux/scripts#
[7.4]
brick:/usr/src/linux/scripts# cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vesafb
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
1000-10ff : ALi Corporation M5451 PCI AC-Link Co
  1000-10ff : ALI 5451
1400-14ff : ALi Corporation M5457 AC-Link Modem
2000-201f : VIA Technologies, In USB
  2000-201f : uhci-hcd
2020-203f : VIA Technologies, In USB (#2)
  2020-203f : uhci-hcd
2040-204f : ALi Corporation M5229 IDE
  2040-2047 : ide0
  2048-204f : ide1
2400-24ff : National Semiconduct DP83815 (MacPhyter)
    2400-24ff : eth0
8000-803f : ALi Corporation M7101 PMU
8040-805f : ALi Corporation M7101 PMU
9000-9fff : PCI Bus #01
  9000-90ff : PCI device 1002:4337 (ATI Technologies
Inc)

brick:/# cat /proc/iomem
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000cf000-000cf7ff : Extension ROM
000e0000-000effff : Extension ROM
000f0000-000fffff : System ROM
00100000-1bf6ffff : System RAM
00100000-002ab15a : Kernel code
002ab15b-0036137f : Kernel data
1bf70000-1bf7bfff : ACPI Tables
1bf7c000-1bf7ffff : ACPI Non-volatile Storage
1bf80000-1bffffff : reserved
2bf80000-2bffffff : reserved
d0000000-d0000fff : ALi Corporation M5451 PCI AC-Link
Co
d0001000-d0001fff : ALi Corporation M5457 AC-Link
Modem
d0002000-d0002fff : O2 Micro, Inc. OZ6912 Cardbus
Contr
d0003000-d00030ff : VIA Technologies, In USB 2.0
d0003000-d00030ff : ehci-hcd
d0003800-d0003fff : Texas Instruments TSB43AB21
IEEE-1394a
d0004000-d0007fff : Texas Instruments TSB43AB21
IEEE-1394a
d0008000-d0008fff : National Semiconduct DP83815
(MacPhyter)
d0008000-d0008fff : eth0
d0009000-d0009fff : PCI device 1002:cbb2 (ATI
Technologies Inc)
d000a000-d000afff : Harris Semiconductor Prism 2.5
Wavelan ch
d0300000-d03fffff : PCI Bus #01
 d0300000-d030ffff : PCI device 1002:4337 (ATI
Technologies Inc)
 d4000000-d7ffffff : PCI device 1002:cbb2 (ATI
Technologies Inc)
 d8000000-dfffffff : PCI Bus #01
 d8000000-dfffffff : PCI device 1002:4337 (ATI
Technologies Inc)
 d8000000-dbfeffff : vesafb
fff80000-ffffffff : reserved
[7.5]

00:00.0 Host bridge: ATI Technologies Inc: Unknown
device cbb2 (rev 02)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
        Latency: 64
        Region 0: Memory at d4000000 (32-bit, prefetchable)
[size=64M]
        Region 1: Memory at d0009000 (32-bit, prefetchable)
[size=4K]
        Capabilities: [a0] AGP version 2.0
                Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh-
GART64- HTrans- 64bit-
FW+ AGP3- Rate=x1,x2,x4
                Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
FW- Rate=<none>

00:01.0 PCI bridge: ATI Technologies Inc: Unknown
device 7010 (prog-if
00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz+ UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 99
        Bus: primary=00, secondary=01, subordinate=01,
sec-latency=68
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: d0300000-d03fffff
        Prefetchable memory behind bridge: d8000000-dfffffff
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset-
FastB2B-

00:06.0 Multimedia audio controller: ALi Corporation
M5451 PCI AC-Link
Controller Audio Device (rev 02)
        Subsystem: Hewlett-Packard Company: Unknown device
0850
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR+ <PERR+
        Latency: 64 (500ns min, 6000ns max)
        Interrupt: pin A routed to IRQ 5
        Region 0: I/O ports at 1000 [size=256]
        Region 1: Memory at d0000000 (32-bit,
non-prefetchable) [size=4K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA
Bridge [Aladdin
IV]
        Subsystem: ALi Corporation ALI M1533 Aladdin IV ISA
Bridge
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV-
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: [a0] Power Management version 1
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:08.0 Modem: ALi Corporation Intel 537 [M5457
AC-Link Modem] (prog-if
00 [Generic])
        Subsystem: Hewlett-Packard Company: Unknown device
0850
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV-
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 0
        Region 0: Memory at d0001000 (32-bit,
non-prefetchable) [disabled]
[size=4K]
        Region 1: I/O ports at 1400 [disabled] [size=256]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:09.0 Network controller: Harris Semiconductor Prism
2.5 Wavelan
chipset (rev 01)
        Subsystem: AMBIT Microsystem Corp.: Unknown device
0200
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at d000a000 (32-bit, prefetchable)
[size=4K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus
Controller
        Subsystem: Hewlett-Packard Company: Unknown device
0850
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV-
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow

>TAbort-

<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at d0002000 (32-bit,
non-prefetchable) [disabled]
[size=4K]
        Bus: primary=00, secondary=02, subordinate=05,
sec-latency=176
        Memory window 0: d0200000-d02ff000 [disabled]
        Memory window 1: d0100000-d01ff000 [disabled]
        I/O window 0: 00001c00-00001cff [disabled]
        I/O window 1: 00001800-000018ff [disabled]
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset-
16bInt+ PostWrite-
        16-bit legacy interface ports at 0001

00:0b.0 USB Controller: VIA Technologies, Inc. USB
(rev 50) (prog-if 00
[UHCI])
        Subsystem: Hewlett-Packard Company: Unknown device
0850
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, cache line size 08
        Interrupt: pin A routed to IRQ 10
        Region 4: I/O ports at 2000 [size=32]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0b.1 USB Controller: VIA Technologies, Inc. USB
(rev 50) (prog-if 00
[UHCI])
        Subsystem: Hewlett-Packard Company: Unknown device
0850
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, cache line size 08
        Interrupt: pin B routed to IRQ 10
        Region 4: I/O ports at 2020 [size=32]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0
(rev 51)
(prog-if 20 [EHCI])
        Subsystem: Hewlett-Packard Company: Unknown device
0850
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+
VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, cache line size 20
        Interrupt: pin C routed to IRQ 10
        Region 0: Memory at d0003000 (32-bit,
non-prefetchable) [size=256]
        Capabilities:
...

read more »

 
 
 

new 2.5.72 breaks aumix

Post by Alex Riese » Tue, 24 Jun 2003 10:10:14


Gerardo Arnaez, Sun, Jun 22, 2003 02:39:57 +0200:

Quote:> [1.] kernel 2.5.72 breaks aumix
> [2.]I have been using 2.5.69-ac1 on a HP pavilion
> ze5285us laptop. i
> maintain a how-to on installing debian on it. I have
> upgraded to the
> 2.5.72 kernel. Now aumix will not longer work

http://marc.theaimsgroup.com/?l=linux-kernel&m=105602254609926&w=2

(original poster notified)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

1. usb memory pen broken since 2.5.72?

My USB memory pen stopped working since 2.5.72, the last time it worked for me
was 2.5.70.

dmesg output on plugin for 2.5.72/73:

hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x101
hub 1-0:0: new USB device on port 2, assigned address 2
drivers/usb/core/message.c: usb_control/bulk_msg: timeout

dmesg output on plugin for 2.5.70 (working)
hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x101
hub 1-0:0: new USB device on port 2, assigned address 2
scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: USB NAND  Model: FLASH DISK        Rev: 0.20
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: Mode Sense: 0b 00 00 08
sda: cache data unavailable
sda: assuming drive cache: write through
 /dev/scsi/host0/bus0/target0/lun0: p1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2

.config for 2.5.70 and 2.5.73 are included in the attachment
plz tell me what to include for a proper bug report, because I don't know what
to check and were to look.

btw. the pen drive is a 128 MB pen drive with the vfat filesystem

  .config-2.5.70
18K Download

  .config-2.5.72
18K Download

  .config-2.5.73
18K Download

2. magicdev?

3. New: [perf][tiobench] tiobench sequential write degrades in 2.5.72-bk2

4. Intel 845G problem

5. BENCHMARK] 2.5.72, 2.5.72-mm1, 2.5.71, 2.5.71-bk1, 2.5.71-mjb1

6. IPNAT and ICMP (traceroute)

7. PnP Changes for 2.5.72

8. XFree86 3.3 - free X server

9. 2.5.72: sbni.c doesn't compile with gcc 3.3

10. Oops captured of 2.5.70-mm9, 2.5.71-mm1 and 2.5.72-mm1

11. 2.5.72 as VMware guest doesn't boot

12. sleep_decay for interactivity 2.5.72 - testers needed

13. 2.5.72 synclinkmp.c